About

Gender

Male


Location

Darmstadt, Hessen


About Me:

New to the Quad business


Please tell us a bit about your UAV interest

-


Hometown:

Frankfurt am Main


Activity Feed

Thomas Kramm commented on Colin Bouriquet's blog post Six modes with Graupner MX-16
"Thanks a lot!!!!"
Feb 27, 2012
Thomas Kramm replied to Randy's discussion ArduCopter 2.4 released
"Has anyone some good starting PIDs for a Octo with about 1.5kg w/o battery and 850KV Motors?"
Feb 24, 2012
Thomas Kramm replied to Randy's discussion ArduCopter 2.4 released
"I have a serious problem since upgrading my 3DR Quad to 2.4 and switched to new remote (Graupner MX-20). When I wanted to give it a try earlier today it just flipped. Back home I checked all settings, made sure its in X-Mode, remote inputs, etc. All…"
Feb 22, 2012
Thomas Kramm replied to Randy's discussion ArduCopter 2.4 released
"Just upgraded to 2.4 and wanted to set parameters for the gimbal. When trying to write CAM_R_G and CAM_P_G I get a "Set CAM_R_G Failed" / "Set CAM_P_G Failed" error, as if I wasn't connected. Other params work. Anyone else experiencing similar…"
Feb 21, 2012
Thomas Kramm replied to Chris Anderson's discussion ArduCopter 2.3 released
"Had another test flight with a new GoPro gimbal yesterday, which does the pitch around GoPros CG. Short Video:"
Feb 17, 2012
Thomas Kramm replied to Dave's discussion 3DR frame feedback
"Got a 3DR since 2 weeks now, hard for me to compare, as its my first Quad. On the Battery Mounting I see the same problems, I added additional velcro between frame and battery and additionally use some rubber band (better save then sorry).
For the…"
Feb 9, 2012
Thomas Kramm replied to Chris Anderson's discussion ArduCopter 2.3 released
"Just hat a quick test with my new GoPro Gimbal. I think I need a better servo for the pitch, but for a start I like the result."
Feb 9, 2012
Thomas Kramm replied to Chris Anderson's discussion ArduCopter 2.3 released
"Just had a bad crash when descending form about 90 meters. Quad flipped about 70m above ground almost 90 degrees and I wasn't able to recover. Anyone any idea what might have gone wrong here? SD Card flipped out of gopro so the file was corrupt, but…"
Feb 5, 2012
Thomas Kramm replied to Chris Anderson's discussion ArduCopter 2.3 released
"Hi all, I'm quiet new to the arducopter and even the whole R/C stuff (got my 3DR Quad Kit last Friday).
Just learned the lesson only to change one thing at a time. 
Since the last changes I got two problems:
1. When I arm the quad and pull up the…"
Feb 4, 2012