Gender
Male
About
Location
Grimstad
About Me:
Coputer Engineering student. Studying Masters in Systems Development
Please tell us a bit about your UAV interest
Autonomous flight
Hometown:
Kristiansand
Activity Feed
"can this be ran in windows? because i cannot get it to work properly."
"HiI'm also working on this exact same problem, I'm working with he University of Agder in Norway, I have created an AI which works well in simulations for autonomous flight, and now the next step is to get hardware control over the device. I have…"
"haha i found the solution, i have re-soldered the PDB twice, but obviously by soldering technique is rubbish on small wires, or the wires where somewhat broken, i did a manual calibration and for some reason only one ESC gave power to the receiver.…"
"Not sure if relevant but in my setup its esc on motor 4 which smoked. And on the side note esc on motor 1 gets incredibly hot when im testing."
HiI had a weird problem, one of my esc's let out some smoke during the calibration, and im gueassing thats not normal. but the strange part is i tested the smoker again isolated, and it works hmm. is it usable?The ESC is of the…
HiI'm having some trouble understanding what is happening here i bought a (ArduCopter APM2.5).When i plug in the power the ESC's fist beeps some tune and then they start beeping regular, all i have plugged in is the APM and Battery. also the motors…
Hi I'm working on a feasibility study for autonomous flight using a ArduCopter, and i have just started, the ArduCopter is bought and built (Type is the quad on the store here). i was planning on programming a interface on the computer to fly the…
