Gender
Male
About
Location
Minneapolis, MN
Please tell us a bit about your UAV interest
Quad Copters
Activity Feed
Can a H Copter use the same as a X Copter and still fly OK?Mainly I am looking for information on the the Motor rotation is different between an X and H copter.Thanksmnmis
"Thanks for the info guys. I was just curious.
How bad is the accuracy?"
How bad is the accuracy?"
"Why was the compass moved externally?"
"I am assuming that the Nano reads the pins from the APM and then blinks the LED's. Is that how it works?"
"Do you have any Schematics on how this is all wired up?"
I setup my APM2.0 to measure the battery voltage and is seems to be not working correctly.I filled in the fields with the battery voltage and the APM input voltage correctly but the calculated voltage is giving random results from as little at 3…
"Heino,
If you want, I can send you the changes, it is pretty easy, remove the camera settings from the Case statement and adjust the TOTAL_PARAMS to 49 and a few other places it needs to be adjusted.
I can't give you what I have been working on…"
If you want, I can send you the changes, it is pretty easy, remove the camera settings from the Case statement and adjust the TOTAL_PARAMS to 49 and a few other places it needs to be adjusted.
I can't give you what I have been working on…"
"Go here to see what I found about the 49 0f 51 error.
http://www.diydrones.com/forum/topics/ardustation2-apm-acm-2-0-15-m...
The deal is that it times out but still works so you can ignore it."
http://www.diydrones.com/forum/topics/ardustation2-apm-acm-2-0-15-m...
The deal is that it times out but still works so you can ignore it."
"I think I figured it out.
"CAM_P_G" and "CAM_R_G" are not valid Parameters any more, I removed them from the code and adjusted the parameters and it works."
"CAM_P_G" and "CAM_R_G" are not valid Parameters any more, I removed them from the code and adjusted the parameters and it works."
I have been looking through the code and so I can build my own Ardustation and is looks like some of the code is not working correctly, especially the get_params function.When I select the Get Params menu, it times out at 49 of 51.Does anyone have…
Is there a way to set the APM2 to use the UART2 output for telemetry without having to recompile the software manually?
"Quick question,
Does the 2.5 board have the same ability to change the UART for telemetry as the 2.0 board?"
Does the 2.5 board have the same ability to change the UART for telemetry as the 2.0 board?"
