Gender
Male
About
Location
Saint Charles, IL
About Me:
Experience in r/c flying, FPV, modeling
Please tell us a bit about your UAV interest
Electronics and homwbuilt platforms
Hometown:
Chicago Suburbs
Activity Feed
"I not really against having some type of display during video out that indicates its recording. With an OSD overlay it kind of gets in the way. I am going to try and move the OSD characters around to make it so there not on top of each other. But…"
"The video out works fine. Just need to figuire out how to remove the firmware and timer text from the bottom of the screen. Ant Ideas?"
"Sandro,
Re: " The OSD board injects translated MAVLink data on the output signal of your video RX."
This it i was refering to in an earlier post. If you inject the MAVLink data into the video signal on the aircraft and use this data from the VRX…"
Re: " The OSD board injects translated MAVLink data on the output signal of your video RX."
This it i was refering to in an earlier post. If you inject the MAVLink data into the video signal on the aircraft and use this data from the VRX…"
"Sorry for the newb questions, just getting into ArduPilot. So with the minimosd, telemetry is sent via the MavLink protocol to the ground station via the video channel? Setup parameters would still have to be sent by USB or and xbee link?"
"Apocolipse,
Looks like a nice setup you have. It appears like the video noise maybe from the motor. You could wrap the wires to the VTX around a ferite core, then use a LC filter on the power wires to the camera and VTX. "
Looks like a nice setup you have. It appears like the video noise maybe from the motor. You could wrap the wires to the VTX around a ferite core, then use a LC filter on the power wires to the camera and VTX. "
"Any updates on an compatible OSD release?"
"I recall reading that 57K was required for HKGS and MavLink."
I just starting with the ArduPilot Mega and was wondering what some of the differences are in the Xbee Modules. I am currently flying FPV with 1.2 Ghz and also could use 2.4 Ghz for video, so was looking at the 900 mhz Xbee modules. What is the…
