About

Gender

Male


Location

Salinas, CA


About Me:

I am a machinist by day and uav tinkerer most of the rest of my time.


Please tell us a bit about your UAV interest

Tbs discovery modded... Chimera running a vector... Wanting to learn the Pixhawk...


Hometown:

Salinas


Activity Feed

Wes replied to Randy's discussion Copter-3.3 beta testing
"It was a Whitespy compass that I had trouble getting the orientation right with also. It is the only compass that I have used so far that required extra work to get it right."
May 21, 2016
Wes replied to Randy's discussion Copter-3.3 beta testing
"I had a similar problem once. The cause was the GPS, it was one of the ones mounted on a circuit board with out a clear way a identifying correct orientation. I was 90* off and upside down and had the symptoms you are describing.

After verifying…"
May 21, 2016
Wes replied to Wes's discussion Effects of frame design on barometer performance ( and all other non 3.3 specific AC questions)
"I don't believe true air speed is the issue here. It is change in speed, or more specificly change in acceleration relating to the begining of a maneuver and at the end of a maneuver. Basically,a high pressure bubble compensator.

A parameter that…"
Jan 19, 2016
Wes replied to Wes's discussion Effects of frame design on barometer performance ( and all other non 3.3 specific AC questions)
"I am aware that there is a bias factor for baro vs accels,
But it is a static relationship.

What might be interesting to consider is to find a way to make the relationship dynamic instead of static.

The sink only happens while accelerating, so…"
Jan 14, 2016
Wes replied to Wes's discussion Effects of frame design on barometer performance ( and all other non 3.3 specific AC questions)
"My naza equipped discovery flies strait fast and low.

My naze32/w baro on a mini 250 looses altitude the same as my Hawk platforms.


Is unreasonable to think that Dji also encountered this altitude sink issue and made a software patch to fix it?…"
Jan 13, 2016
Wes replied to Randy's discussion Copter-3.3 beta testing
"I attempted to upload 3.3.2 coming from 3.3.1 and the upload completes fine.
But when the "please wait for musical tones to finish before clicking ok" pops up I do not get any musical tones even after several minutes.

The hawk board won't connect…"
Dec 5, 2015
Wes replied to Randy's discussion Optical Flow discussion thread
"Wow, to Philip and Goro, thank you!

That is some of the best and most complete diagnostic and set up information that I have seen on the PX4flow to date!

Thank you again!"
Nov 24, 2015
Wes replied to Randy's discussion Optical Flow discussion thread
"Lidar is a very accurate sensor for measuring distance, maintaining a specific distance from the ground.

Optical flow is a whole different animal, a down facing camera looks at the ground to determine movement and then processes the movement in to…"
Nov 23, 2015
Wes replied to Randy's discussion Optical Flow discussion thread
"The correct firmware has been installed, the camera has been focused.

What I am not seeing is any useful data being generated by the sensor in the logs.

Is there a way to see live data to verify that the PX4flow sensor is working correctly?"
Nov 23, 2015
Wes replied to Randy's discussion Optical Flow discussion thread
"Mounted to an Alien 680mm frame, with a hawk loaded with 3.3 r1, Lidar lite installed and functioning well...

Having followed the Ardupilot wiki for the PX4flow...

PX4flow loaded with the Ardupilot recommended firmware.

Optical Flow enabled in…"
Nov 23, 2015
Wes replied to Randy's discussion Optical Flow discussion thread
"Thank you!"
Nov 22, 2015
Wes replied to Randy's discussion Copter-3.3 beta testing
"[URL=http://s1239.photobucket.com/user/86burbguy/media/Mobile%20Uploads/DBBF1154-7A31-42CE-998D-C13C8C6B12DD.png.html][IMG]http://i1239.photobucket.com/albums/ff502/86burbguy/Mobile%20Upload...[/IMG][/URL]

This is on an Alien 680 also. Flys…"
Nov 15, 2015
Wes replied to Randy's discussion Copter-3.3 beta testing
"Lidar lite v2 is only 115.00.

http://www.robotshop.com/en/lidar-lite-2-laser-rangefinder-pulsedli...

It would be nice to have the option use the installed sonar or lidar, either way OF is really neat feature."
Nov 4, 2015
Wes replied to Randy's discussion Copter-3.3 beta testing
"I would say I am right there with you, but you have clearly thought this through more deeply than I have. I am getting ready to mount a px4flow but have not entirely wrap my mind around when OF works and if by using it I loose functionality some…"
Nov 3, 2015
Wes replied to Randy's discussion Copter-3.3 beta testing
"I have been playing with the lidar lite and am very impressed with how well it makes my quad hold altitude. It make arducopter still more fun to use!

I am really looking forward to fuller integration of range finders,(during auto missions)and the…"
Nov 1, 2015
Wes replied to Stephen Zidek's discussion The PX4Flow Thread
"I have a PX4Flow I am getting ready to mess with, already have lidar lite working, but have not found any more info than what is on the wiki.

Is there an active blog/ forum thread for people who are actually using the PX4Flow?"
Oct 30, 2015
More…