"+1 on the update log (APM, Planner, etc). Something basic, just a couple lines of what was changed. Give us non-software people some idea of what to expect."
"I'm still having issues. Using the CLI (either through the Mission Planner or the HK GSC), I can set the modes normally. They save, and repeat as set. However, in flight, selecting (from the Tx) Circle, Loiter and RTL all report "Auto Loiter",…"
"Not sure if this is mentioned elsewhere; I'm using the Pot knob on the front of the 9X transmitter as a mode switch. I used a red and black marker to mark the alternating arcs/zones for the 6 modes (0-5) around the knob. This way all modes are in…"
I'm using APM 2.012 (beta). I have the different modes set up on a rotary knob on the radio, which allows 5 positions (0-4). I use the Command Line to set and save the modes. In operaion, I use the HK GCS 'status' to verify the modes. However, I'm…
"WELL DONE! Just wanted to comment to all contributors, to a job well done on the manual, etc. Got my ArduPilot on Mon evening, couple hours putting it together & on the computer, it's installed in the airframe (Stryker) and working well. Thanks to…"