"Hello everyone
i am using ac 3.2.1 with x8r+ teency 3.1+pixhawk and i wonder how can i see RSSI value on my minim osd ?
currently shows 0 value"

"Ok but as i understand in order to work with this script:
https://youtu.be/8Ldy0xH_G7M
you must use their adaptor even the teency 3.1 won't do the job .
because their 
Adapter uses native FrSky protocol coming from the Pixhawk, whereas the Teensy…"

"can you share a link to buy this adapter for 5 bucks"

"its 14$ for the script and another 14$ for the cable\adaptor
what exactly you meant by this picture is it the teensy ?"

"Hi Luis
I use your old script with 3.2.1 and 2.0.15 on taranis
i wonder if i can upgrade the taranis tx to the latest firmware and steel to be able to use your old lua script ?
or maybe that will screw all ?
thanks"

"Hi luis
 1 .so is it a must to use the resistors network to get cell voltage on taranis ?
    are you using it too ?  or just plug the flvss to balancer and to x8r
 2. on your ac 3.2 script the transmiter inform the flight mode by voice
     is it…"

"ok
so by using a simple y cable
i will see each cell on the lua screen ?
by the way i am using the script by IVALE
https://github.com/lvale/MavLink_FrSkySPort
ac 3.2.1
didnt preform any flight test yet so to move to  ac 3.3 seems to be a big issue…"

"Great 
But how did you connect this sensor together with the teensy they both use the same s.port
And on the x8r receiver we have only 1  s.port ?
Little diagram will be very helpful 
 "

"Hello to evryone
wonder if i can use this sensor to get each cell volt :
http://www.banggood.com/DIY-FRSKY-S_PORT-Voltage-Sensor-1-6S-For-X9...
instead of the original fvlss by frsky ?
and how can use it without the resistors board ?
or maybe with…"

"hi luis
wonder if you made any progress on your code to work with ac 3.3 and new opentx ?
I just finished my project using pixhawk and your perfect code and about to preform test flight
should I proceed or wait  for the new code  to upgrade ?
I am…"

"so that is one board combining teensy 3.1 and minim osd connected to s.port ?
looks nice
but hope you wont abandon the old project... "

"you forgot to mention luis:
https://github.com/lvale/MavLink_FrSkySPort
for open-tx 2.0.x"

"so that means a lot of work for you i guess ?"

"cool
so i test with 3.2.1 and wait ...
thanks"

"H luis
is there any progress on AC 3.3 & OPEN TX 2.1 with taranis and teensy ?
regarding your script 
currently i am on ac 3.2.1 open tx 2.0.17 and didn't preformed test flight yet  "

"strange when i set ch8 to trigger RTL i can see it change on the taranis but it follows a "flight mismatch  " sound 
where can i fix it ?
also on ch7 i choose Auto Tune and when i trigger it i see on mission planer "autotune stopeed" 
is it normal ?…"