Gender
Male
About
Location
london
Please tell us a bit about your UAV interest
Tarot 680pro apm2.6
Hometown:
london uk
Activity Feed
My gimbal was working fine and I could do point camera here in mission planner and it all worked.Then I changed radio to taranis x9d and it still moves with the radio button but not in mission planner anymore.I re calibrated radio and set correct…
"I might be wrong but if a engine is rated 3s max then it will be looking for 11.1v max and your 4s will be 14.4v so even at 30 percent it will still be putting the higher voltage in it .Carbon props would be better"
"I had no probs on win 8.1"
"Can't you move antennae further apart"
"Also try set gopro to 720p and no osd"
"I had a similar problem but it went when I soldered the jumpers to pass 5v through and done away with the 12v"
"Did you calibrate radio in mission planner"
"No its one of the cheap china ones .martinez board."
"Zoom out on mission planner and it will show you . Big circles around airports etc"
I have a 2 axis gimble and at certain positions it seems to vibrate . Any ideas why
"I had a problem like this and it Was fence settings"
"I have one of these and after trying every combination of settings and baud rates I never got it to work ."
