Gender
Male
About
Location
Bielsko Biala
About Me:
Fan of aviation, gliders pilot.
Please tell us a bit about your UAV interest
Aerial photography, X4/X8.
Hometown:
Poland.
Activity Feed
Hello colleagues, does anyone some experience with Beitian Glonass GPS BN-220 and possibility to work with APM 2.5?
"In case of encoder, it is a next step and know that it it is necessity. If some of you are interesting with support with this topic, I'm open for discussion and cooperation."
"Yeah Greg, when I started design with the gimabal I showed the sketches to my wife with question: is it enough sexy? She laugh, but understood my meaning. Except the minimum weight and usability the nice view was my concern as well. Back in to the…"
"Jose, hollow shaft in the engine and in to opposite sensor shaft allows threaded wires. COG adjustment possible - oval holes for the screws. All hidden inside."
"John, at the moment 10 pcs during tests fly then serial production will be run. "
"Jesus, true it was my concern how to deal with nice view and practical usage. In the cf structure after deep analysis of COG Ive designed some "stadion" holes for adjustment and it is enough for common size of cameras."
"Pitch GB 2808
Roll GB 4006
Yaw GB 4008 or 5208 with slip ring
Its enough power."
Roll GB 4006
Yaw GB 4008 or 5208 with slip ring
Its enough power."
"Lazy,
one axis one motor. In case of roll, on one side we have motor and in to opposite IMU sensor."
one axis one motor. In case of roll, on one side we have motor and in to opposite IMU sensor."
"Rob,
basically I'm satisfied with the gimbal. Is very light and most important thing is stiffness. The test gimbals has Alex 32 bits with typical IMU sensor. I think the next step is consider to use encoder. In this case we will not loose any step…"
basically I'm satisfied with the gimbal. Is very light and most important thing is stiffness. The test gimbals has Alex 32 bits with typical IMU sensor. I think the next step is consider to use encoder. In this case we will not loose any step…"
Radical M carbon gimbalHi,I would like to announce my newest project which was made during last few months.Weight for 2 axis 520gWeight for 3 axis 620gAlex or other controllerAll wires and pcb inside the frameCamera size - Sony Nex or similarProject…
"Just chose option "open with" - tap two fingers on touch pad - and later you can open in the standard way."
"Meantime I solved the problem, thanks."
"Hi, I just tried to install the application on Meverick but have some trouble. Do you have any idea how to solve this problem?"
"Hi Colleagues,
thank you so much! It is what I like to do; DIY - from start to end. "
thank you so much! It is what I like to do; DIY - from start to end. "
Hello,Are the gimbals limited to drones, handy or those that are close to the ground? I would say no.This topic, which now I briefly describe, took me about two Months. The most important thing is that our glider pilot Sebastian Kawa, a multiple…
