Gender
Male
About
Location
bandung, westjava
About Me:
very interest to apm and arducopter technology
Please tell us a bit about your UAV interest
it can make a great video movement
Hometown:
bandung
Activity Feed
HelloCan we Calibration compass and accelerometer without Mission Planner or groundstasion?maybe using switch on remote or quickly flip the switch like dji Phantomthanks
"What about "Reset To arm YAW", its already Fix?
https://github.com/diydrones/ardupilot/issues/1368
i Use micro Vrbrain,, this function is not work on quadcopter 3.2 FW "
https://github.com/diydrones/ardupilot/issues/1368
i Use micro Vrbrain,, this function is not work on quadcopter 3.2 FW "
"My hexa just FLY away from me and LOST!!
arducopter 3.1.rc5
apm 2.5
gps lock (solid blue led and wait for about 1 minute)
stabilize - loiter ( not too bad ) - stabilized ( suddenly fall to floor) and motor spin very faster - and fly away-- cannot…"
arducopter 3.1.rc5
apm 2.5
gps lock (solid blue led and wait for about 1 minute)
stabilize - loiter ( not too bad ) - stabilized ( suddenly fall to floor) and motor spin very faster - and fly away-- cannot…"
"My hexa just FLY away from me and LOST!!
arducopter 3.1.rc5
apm 2.5
gps lock (solid blue led and wait for about 1 minute)
stabilize - loiter ( not too bad ) - stabilized ( suddenly fall to floor) and motor spin very faster - and fly away-- cannot…"
arducopter 3.1.rc5
apm 2.5
gps lock (solid blue led and wait for about 1 minute)
stabilize - loiter ( not too bad ) - stabilized ( suddenly fall to floor) and motor spin very faster - and fly away-- cannot…"
"HELLO APM 2.5 arducopter 3.0.1rc2
Somebody here have same experience with me???
My APM now Doesn't Work,,, The three LED (ABC) Is just Goes out and in,,(is like I unplug and replug the power)
But the green light is constantly on...
cannot connect to…"
Somebody here have same experience with me???
My APM now Doesn't Work,,, The three LED (ABC) Is just Goes out and in,,(is like I unplug and replug the power)
But the green light is constantly on...
cannot connect to…"
"WHAT HAPPEN TO MY F***ING MAG OFFSET??
ARDUCOPTER 3.0.1.RC2
I buy another APM,, (after Bad CRASH with my first APM, my stupidity) ,, at First time, I open from plastic/box,, The APM without any Soldering And Case, I calibrated the Compas,, I get…"
ARDUCOPTER 3.0.1.RC2
I buy another APM,, (after Bad CRASH with my first APM, my stupidity) ,, at First time, I open from plastic/box,, The APM without any Soldering And Case, I calibrated the Compas,, I get…"
"Hi niklas, I have same problem,, sometimes the HUD going crazy,, specially at ROLL,,
sometimes I wonder thats because interference or big vibration to baro and accelero sensor because I didn't close the board,, I close the board with foam and 3dR…"
sometimes I wonder thats because interference or big vibration to baro and accelero sensor because I didn't close the board,, I close the board with foam and 3dR…"
"Thanks Quadzimodo
I try to cut again,, Check the configured,,, check voltage (3,1 v)..
still appear = terminal test compass initialization failed
when try to ARM,, there is red font > PROARM : COMPASS NOT HEALTY,, so I cannot ARM
just info chip…"
I try to cut again,, Check the configured,,, check voltage (3,1 v)..
still appear = terminal test compass initialization failed
when try to ARM,, there is red font > PROARM : COMPASS NOT HEALTY,, so I cannot ARM
just info chip…"
"I just Bought this http://www.goodluckbuy.com/gy-271-hmc5883l-module-compass-module-3-...
From a local Store
I use Apm 2.5
I follow this step http://copter.ardupilot.com/wiki/common-external-magnetometer-for-i...
it does't work
terminal test compass…"
From a local Store
I use Apm 2.5
I follow this step http://copter.ardupilot.com/wiki/common-external-magnetometer-for-i...
it does't work
terminal test compass…"
"Help me May be someone can analyzed my logMy spec :FY tarot 680 Arducopter 3.0APM 2 RC timer Turnigy Ubec 5 A low RF noise Simonk firmware ESC(i'm not sure the brand and curent)AX 2810 750KVTurnigy 9XRfrskyBuzzerFlighmax 5000 Mah 4s 30CGPS Ublox Neo…"
