yassine's Discussions

bad gyro health

hello;

i t's displayed bad gyro health in mission planner , i like to ask if the metal has an effect on the gyro, so it must put it away from the metal ?

thanks

Started by yassine

attopliot

hello;

i work with pixhawk, my battery is thunder power rc 5000 mah, 22.v 6 cell , i want to know the attopliot compatible with it?

thanks

Started by yassine

after doing the sensors and the esc calibration in mission planner; i observe that motors spin with a higher velocity at the minimum of throttle , this problem caused the crash of the hexacopter when i try to fly it .
have you an idea about this

Started by yassine

the throttle at 10% is higher

hello;

i have the problem of the throttle at 10% is higher like this video

https://www.youtube.com/watch?v=pNxQ77T4TE4

how i can resolve this problem ?

thx

Started by yassine

the connection between Black MAJIC debugger and pixhawk

hello;

i like to connect the BLACK MAJIC DEBUGGER into pixhawk , i think that i must add this device http://media.digikey.com/photos/Sullins%20Photos/GRPB052MWCN-RC.JPG in the place of FMU SWD ARM MINI JTAG like this website http://pixhawk.org/_det

Started by yassine

send and receive data by the 3DR telemetry

hello;

how i can send and receive data by the 3DR telemetry ?

thx

Started by yassine

the arming of motors

Hello;

i did the arming of motors ,but i see that when i hold the throttle down the motors still spin at a low speed

can you explain me this problem?

thank you very much

Started by yassine

i don't find this file ComputeAggregateTypeSignature.hpp

hello;

i have this error when i did make , i don't find this file ComputeAggregateTypeSignature.hpp:

c:/px4/Firmware/uavcan/libuavcan/include/uavcan/protocol/data_type_info_provider.hpp:10:61: fatal error: uavcan/protocol/ComputeAggregateTypeSignature.

Started by yassine

problem after arming the motors

hello

the motors spin only after doing the arming of motors , but when i unplug the battery i can't spin the motors again

what's the problem

thank you very much

Started by yassine

the led of the module GPS 3DR is red although the led is flashing blue

hello

i work indoor so i have the the led of PIXHAWK is flashing blue but the led of the module GPS 3DR is red

do you think that there is a problem ?

thank you very much

Started by yassine

led flashing blue

hello;

i did the compass calibration ,the RC calibration,the ESC calibration and i did the arming of motors, i work indoor and

i have the led of pixhawk flashing blue, do you think that i can obtain the led flashing solid green indoor ?

thank you very

Started by yassine

the programmation of pixhawk

hello;

have you an idea how i can program the pixhawk , i like to do the command of the pixhawk what's the softwares is used to program it ?

thank you very much

Started by yassine

Double flashing yellow: error. System refuses to arm.

Hello;

I did the compass calibration,the RC calibration and the ESC calibration and now i have the led of pixhawk flashing yellow(system refuses to arm), and it's shows Disarmed and PreArm:Rc not Calibrated in the mission planner.

How i can solve this

Started by yassine

GPS no fix problem in mission planner

Hello,

I have a problem to arm my Pixhawk, it is flashing blue (disarmed, searching for GPS. Autonomous, loiter, and return-to-launch

modes require GPS lock).

can you help me please

Thank you very much

Started by yassine