A place for West Australian UAV / UAS enthusiasts or businesses to discuss topics, arrange meets or share experiences.

43 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • AUTO and RTL is all OK.

    Flew my first auto mission perfectly this morning in 15kt winds.

    The Finwing Penguin is the best plane I have ever flown - flew on rails in a strong wind

  • Success on my first APM flight.  The Penguin as usual flew like it was on rails.

    Tested manual and stabilise mode which both worked perfectly.

    Tested the mavlink and ground station - all worked OK

    Analysing the logs now to make sure there are no nasties hidden before I try an automatic flight.

  • Hey Nick and James,

    You both should have an invite in your mailbox for the group. If anyone else wants to participate let me know.

    Good to catch up and meet everyone. Will cu on the group forum soon. And for the next meet in 2 weeks!

    Regards

    JB

  • Moderator

    Did someone here say that they had a 3D printer?  Got a little prototype gopro hero3 mount I just drew up, any change someone can print it for me?[Download GoProMount.stl]

    https://storage.ning.com/topology/rest/1.0/file/get/3692653697?profile=original
  • That sounds good John. Sorry I didn't know you were away again. We will definitely leave a chair for you on the WA UAV roundtable! Part timers are always welcome too. I'll keep my Sundays open as best I can for when you get back. I'll also send you an invite to our new forum etc.

    C U there!

    JB

  • Hi there JB.

    Mate, I would love to attend. Unfortunately I'll be offshore until at least the 27th.
    I know that due to my work commitments I can't fully commit to the OBC but I will help out in any way that I can. I would love to see a WA group succeed so PLEASE keep me in the loop.

    I look forward to catching up with all of you boys when I get the chance.
     
    JC
  • Hey John,

    Were you interested in coming to the meet about the OBC as well on Sunday?

    Anyone else otherwise?...Would be good to catch up with everyone in the area with the same interests. Coming to the meet isn't committing to the OBC btw!

    Cya soon

    Regards

    JB

  • Hai yeah I know...it's still along way to go. I'd rather rush into it now rather than stress to meet a deadline later! but we still have plenty of time. I'd like to actually "practice" searching for Joe long before we actually have to. I plan on including most of my family, my boys are already involved in RC etc. But time management and planning is key. No good if we go broke or damage a relationship in the course of pursueing the OBC. There's no fun in that! 

    Stephen you have mail!

  • Moderator

    @JB nice! just remember the OBC isn't a 100m sprint it's more like an Ironman triathlon!

    We need to train hard and pace ourselves.

    Don't forget we have families and jobs that will demand our time.

  • Jb - I cannot find your email address. Send me an email to stevegloor at gmail.comand I will send it to you.
This reply was deleted.

Hexicopter

Hi AllPurchased a FlyPro X600 and I am trying to sort out what would be the most suitable camera to use for FPV and some video/stills photography.  The supplier has wired it up for a GoPro 3.  That model is a little out of date but a good camera to start with although if I am going to purchase a camera I would like to only spend on a one of that last for sometime.  I have had a look at the specs for the for what I will be flying it for Sony FDR-X1000V.  The software has stabilisation and some…

Read more…
0 Replies

UAV Long Range Video

I don't know if you have all seen the write up by CanberraUAV however Andrew replied to a question with this:"Comment by Andrew Tridgell 11 hours ago@Stephen,We ran the Ubiquity radios in normal AirMax mode. We used it to send UDP packets encapsulating a protocol we invented for the event that we call block_xmit. That is a reliable block sending protocol that is particularly good in high packet loss environments. We got about 25% packet loss during the flight, so sending images and data using…

Read more…
4 Replies

APM2 board: not able to get past radio calibration step. please help.

Would anybody be able to help me with Mission Planner comms to APM2 board? I've hit a hump that is troubling me. I'm not able to get past radio calibration step on new board and gear (Turnigy 9ch). I've got considerable IT experience and some APM1 successes but this prob is a B. Could just be a faulty dataflash card or PC security jamming actions, Be great to hear your thoughts 9453 3580problem described at http://diydrones.com/forum/topics/no-bars-to-calibrate-radio-signal...CheersBrett

Read more…
2 Replies