Gender
Male
About
Location
Wiltshire
Please tell us a bit about your UAV interest
Just for fun...
Hometown:
Swindon
Activity Feed
"Off-center is fine for both the compass and the GPS.
The compass calibration should work out the offsets and sort you out on that one provided that you have the orientation correct.
The main issue that you will face is that the closer you move the…"
The compass calibration should work out the offsets and sort you out on that one provided that you have the orientation correct.
The main issue that you will face is that the closer you move the…"
"Oh ... and you may be wondering why does he not just relocate the compass... this is my Ardu Phantom,
I want to use the stock compass in the stock location ... :)"
I want to use the stock compass in the stock location ... :)"
Hi All,I have a question about the compass orientation in Mission Planner and inherantly in the APM once mission planner has been configured.I have a non standard compass and I want to mount it: a) Rotated Compass Roll Left 90 degrees wrt frame…
"Resolved ... boards fried, replaced and all Ok now.
Andy"
Andy"
"I have had the same ...I had chunky carbon fibre props on so we were fine in terms of broken props.
The copter takes off fine in Stabilise and runs its auto mission without a problem, but sometimes with an auto takeoff the copter will roll heavily…"
The copter takes off fine in Stabilise and runs its auto mission without a problem, but sometimes with an auto takeoff the copter will roll heavily…"
"This is just what we need!!! Autotune is not quite producing the results for me just yet and my Tarot 680 is twitchy twitchy twitchy!
F550 standard frame is not too bad but still needs some work - Does anyone have a good PID set for a standard F550…"
F550 standard frame is not too bad but still needs some work - Does anyone have a good PID set for a standard F550…"
"I'm struggling with my Tarot gimbals too ... I bought two and can't get either of them to fire up!!
One seems really dead, the other is a bit dead ... A few yellow flashes then flashing red, connected to the IMU side of the controller and connects…"
One seems really dead, the other is a bit dead ... A few yellow flashes then flashing red, connected to the IMU side of the controller and connects…"
"Have you calibrated your sensors?
I would suggest checking with a quality clamp meter on the battery positive cable.
Double check the voltage on a multimeter."
I would suggest checking with a quality clamp meter on the battery positive cable.
Double check the voltage on a multimeter."
"Resolved in Mission Planner 1.3.7!
Thanks!
Andy"
Thanks!
Andy"
"All working fine thanks for the rapid support!
Andy"
Andy"
"Fantastic ... Attempting to download now ... Will let you know the progress.
Andy"
Andy"
"It's an epidemic!!
Hope that the Dev's can help on this one!! They do a fantastic job so I don't want to be at all critical!
Copters Piling up (literally) waiting to fly!
Andy"
Hope that the Dev's can help on this one!! They do a fantastic job so I don't want to be at all critical!
Copters Piling up (literally) waiting to fly!
Andy"
"How do I get back to the older version to check? Auto update is a great feature but I can't figure out how to get back to something known to work.
Andy"
Andy"
"Had exactly the same issue!
Changed PC in the middle of a flying day and one flight was fine the next it would not fly!
Turns out that somehow the new PC had change the frame type ... took some figuring out!
Andy"
Changed PC in the middle of a flying day and one flight was fine the next it would not fly!
Turns out that somehow the new PC had change the frame type ... took some figuring out!
Andy"
"Exception Details:
Exception Details
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException
at System Collections…"
Exception Details
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException
at System Collections…"
Hi All, I have just upgraded to mission planner 1.3.6 build 1.1.5306.14681 and I can not get the compass calibration to work. I am building a new copter and this is a show stopper for me since you can't arm without compass calibration (quite…
