"I've been wanting to do a project like this for ages, but I'm years away from being at a level to be able to actually do it. MAKE IT HAPPEN YO!! :DPlease add a micro USB port on them also so we can run debugging over a laptop for prop test setups…"
"I came across this program yesterday which takes video input and outputs it to the DK2https://www.youtube.com/watch?v=vUeBBUfSGywhttps://developer.oculusvr.com/forums/viewtopic.php?f=28&t=11001Highly recommend it, as it does a lot of cool maths in…"
"I have checked it time and time again. But you are correct, it is a motor rotation problem, BECAUSE I had the frame set to "H Frame", which requires the rotation of props to spin the opposite to a common X and V frame (the usual quads I build)So…"
So I've been looking on this site and others for a few hours now and I can't seem to find anyone with the following symptom...When I push my stick to the right, the copter yaws (turns) to the left. And visa-versa, push stick to the left the copter…
"So can I link both parts of the camera to each other via wire connectors so I can have them apart at different distances?I mainly want to play with perspective, lenses and how placing the cameras at different distances apart from each other affect…"
"I would expect, if its back heavy, wouldn't it just spool up the rear motors more to keep it level?The hard part also will be working out where the optimal center of gravity should actually be on a TBS like frame"
So I'm getting this weird symptom after a little while of flying in stabilise mode (haven't checked the other modes yet). If I have my elevator forward, so thus the quadcopter is flying forward, OR I'm holding it position fighting wind, after a…
"I hooked a 3S lipo up to it, heres my results, from simply holding it and testing.* Full engine, plus full collective = 37~38amps* Halfish engine, plus full collective = 31amps* Halfish engine, with collective enough to make it feel really light…"