Gender
Male
About
Location
Western Cape
About Me:
Mechanical Engineer working in the film industry
Please tell us a bit about your UAV interest
Interested in the commercial use of UAVs especially in the film and entertainment indusrty
Hometown:
Cape Town
Activity Feed
"Hi, any update on the VTOL? Is it commercially available yet?
Getting ready to maiden my first Believer:)believer2.png"
Getting ready to maiden my first Believer:)believer2.png"
"Hi Quan Le,
I agree with the above comments. You need accurate ground control points if you are looking to produce an accurate model. The number and positioning and accuracy of the GCPs is also important and depends on the topography. This is…"
I agree with the above comments. You need accurate ground control points if you are looking to produce an accurate model. The number and positioning and accuracy of the GCPs is also important and depends on the topography. This is…"
"Thanks Steve,
I've checked my logs from three different platforms that go back more than a year. All have the same issue!
I'm wondering if it's a setup issue on the 3DR u-blox modules? Could be location based."
I've checked my logs from three different platforms that go back more than a year. All have the same issue!
I'm wondering if it's a setup issue on the 3DR u-blox modules? Could be location based."
"Hi Steve, did you manage to resolve this issue? I have the same problem and am struggling to geo-reference my images because of it.
I have a few platforms running Pixhawk/APM with the ublox GPS module and they all have the same problem."
I have a few platforms running Pixhawk/APM with the ublox GPS module and they all have the same problem."
"Great stuff Tim. Really looking forward to this product!
I'm hoping this will be available in South Africa?
Please keep us in the loop."
I'm hoping this will be available in South Africa?
Please keep us in the loop."
"Hi,
Did you manage to get to the bottom of this? I seem to have the same problem. I'm trying to geo-reference my pics on a time based reference in Mission Planner, but the time log from my Pixhawk is incorrect."
Did you manage to get to the bottom of this? I seem to have the same problem. I'm trying to geo-reference my pics on a time based reference in Mission Planner, but the time log from my Pixhawk is incorrect."
"Hey Seidi,
I discovered it was a computer specific problem which I never managed to solve. I managed to get the firmware updated using another computer. I've also recently updated the firmware to my new pixhawk FC with no problems (on a different…"
I discovered it was a computer specific problem which I never managed to solve. I managed to get the firmware updated using another computer. I've also recently updated the firmware to my new pixhawk FC with no problems (on a different…"
"Problem solved - Turned out to be a Windows 7-USB issue on my laptop. Still not sure what is causing the problem, but at least my copter is flying!"
Hi,I'm doing a first time set up for my 3DR Quad using an APM 2.6 board. I've managed to install the Mission Planner software and the device drivers for the APM. I've set the baud rate to 115200 on both the Com port and in MP and selected the…
