Gender
Male
About
Location
RN
Please tell us a bit about your UAV interest
Photogrametry
Hometown:
Santiago
Activity Feed
Hello friends:I am writing to please help me solve the mystery of this cruel accident. On the opening flight of my SABRE UAV in the Autotune process I suddenly lose control of the plane which accelerates brutally and turns to the right. I lose total…
"Thank You
I´ll be posting there.
Here is my data log
https://www.dropbox.com/s/rmyef6rgua48zng/2016-11-26%2018-40-21.bin...
Thanks again Emin Bu said:
Tom Kopp,You should post your questions here http://discuss.ardupilot.org together with…"
I´ll be posting there.
Here is my data log
https://www.dropbox.com/s/rmyef6rgua48zng/2016-11-26%2018-40-21.bin...
Thanks again Emin Bu said:
Tom Kopp,You should post your questions here http://discuss.ardupilot.org together with…"
"I read in the forums that it was an issue with low Kv motors and ESC with SimonK Software.
http://discuss.ardupilot.org/t/arducopter-3-2-1-autotune-problems-w...
Seems that my ESC can´t be re-program I use 30A Opto Oneshot 125 Spider ESC.
Here is…"
http://discuss.ardupilot.org/t/arducopter-3-2-1-autotune-problems-w...
Seems that my ESC can´t be re-program I use 30A Opto Oneshot 125 Spider ESC.
Here is…"
"Hello
I have almost the same problem.
-Quad Tarot 650- ESC: Spider 30A Opto- Motor T-Motor MT4004 400Kv- Autopilot: Pixhawk 3.4.2- RC: Futaba 14SG- Receiver: R6303SB
- 6S 5000mA…"
I have almost the same problem.
-Quad Tarot 650- ESC: Spider 30A Opto- Motor T-Motor MT4004 400Kv- Autopilot: Pixhawk 3.4.2- RC: Futaba 14SG- Receiver: R6303SB
- 6S 5000mA…"
"I just have the same problem!! Crashed five times. When I use autotune the quad goes unstable.
Did you solve it???
Thanks in Advance
Tarot 650
Pixhawk with 3DR GPS
14" x4.7" Carbon Fibre props
6S 5000
Spider 30 Amp Opto ESC"
Did you solve it???
Thanks in Advance
Tarot 650
Pixhawk with 3DR GPS
14" x4.7" Carbon Fibre props
6S 5000
Spider 30 Amp Opto ESC"
Hello everyone. I want to ask how to configure the pixhawk Failsafe. Taranis my radio has a range of 2km and my rfd900 telemetry is 15 km. In an automatic mission with more than 2 km and less than 15, the Taranis initiate a Failsafe although rfd900…
"How do you do it? I have not seen any virtual port... PX4 PMU com4
Thanks in advance"
Thanks in advance"
"Hello to all!!!
Here is my parameter file is someone is interested in Pixhawk on a Cessna 500 Class
Parametros Cesna Rev 1B.param"
Here is my parameter file is someone is interested in Pixhawk on a Cessna 500 Class
Parametros Cesna Rev 1B.param"
"Thank you!!!!"
"Hello Everyone:
I'm trying to find out what happened. I would love for someone with more experience could help me with the interpretation of LOG flight.What happened was that after flying a bit in the AUTOTUNE mode switched to FBWA mode. Everything…"
I'm trying to find out what happened. I would love for someone with more experience could help me with the interpretation of LOG flight.What happened was that after flying a bit in the AUTOTUNE mode switched to FBWA mode. Everything…"
"Hello.
This radios can be connected to pixhawk??? Looks like no
Thanks"
This radios can be connected to pixhawk??? Looks like no
Thanks"
"Thanks"
"Dear Andre:
Here is a link to a video with the behavior of the elevons. Could you please clarify if it is appropriate, taking into account the limited one of the elevons in response to the Pixhawk roll movement.
I do not wanna crash again.
Thanks in…"
Here is a link to a video with the behavior of the elevons. Could you please clarify if it is appropriate, taking into account the limited one of the elevons in response to the Pixhawk roll movement.
I do not wanna crash again.
Thanks in…"
"Thank you MarkM
This is how stayed. Video
Please let me know if the problem is now solved."
This is how stayed. Video
Please let me know if the problem is now solved."
"Thanks Andre:
Here is a link to a video, so please you check and let me know if this time is correct
Thanks in advance."
Here is a link to a video, so please you check and let me know if this time is correct
Thanks in advance."
