Hello everybody,
I'm trying to switch on/off some leds using switch relay.
I need to turn a relay on or off based on the PWM value.
5v are provided to Aux ports using an external BEC which also performs the function of secondary power supply.
I've read t
Read more…hello,
lately I have experienced this problem, all happened after installing a 5v supply ubec on pixhawk servo port, I have also installed a zener diode 5.6 V 5W and a 1000 μF capacitor to smooth the signal.
I have checked my log to see if I can fin
Read more…Hello everybody,
I was wondering if it is possible to configure servo rail for back up power, I have read this sentence on this wiki page and the real matter is that I can't really figure out how can I configure this feature.
To be honest the word conf
Read more…Hello everybody,
I was wondering if it is possible to configure servo rail for back up power, I have read this sentence on this wiki page and the real matter is that I can't really figure out how can I configure this feature.
To be honest the word conf
Read more…Hello everybody,
I was wondering if it is possible to configure servo rail for back up power, I have read this sentence on this wiki page and the real matter is that I can't really figure out how can I configure this feature.
To be honest the word conf
Read more…hello,
is there anyone who can tell simpleBGC from storm32BGC? despite the big difference on price they look pretty much the same to me...am I missing something?
link below,
storm32 http://www.olliw.eu/storm32bgc-wiki/Main_Page
simplebgc http://www.basec
Read more…is there a way to get the current drawn by a gimbal motor in full operation?
motor specs:
Poles: 12N14P
KV(RPM/V): 210
Resistance: 10.4omh
Weight: 35g
Wire: 0.19mm
Torque: 240g
camera weight: 135g
I was wondering this because my gimbal controller can ha
Read more…Hello all,
I can not calibrate my internal compass anymore. No problem for the external but the internal doesn't show any sign of life.
As you can see in the image below the second compass during calibration doesn't move.
Do you have any advice on this
Read more…Hello,
I was just wondering, how much current can a 14 AWG wire handle?
can anyone explain and give further detais on this matter?
Marco
Read more…Hello all,
can a single ubec like this http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=31702 provide the 5 V. to power up a camera and at the same time being a powering backup for pixhawk?
Regards.
Marco
Read more…Can anyone tell me how can I fly my copter keeping costant distance between it and the ground, I want to use google earth data to achieve this, I think it is possible but I have some problem to figure it out...
regards
Read more…Can anyone tell me how can I fly my copter keeping costant distance between it and the ground, I want to use google earth data to achieve this, I think it is possible but I have some problem to figure it out...
regards
Read more…Hello everybody,
I was trying to understand how mission planner works during planning, I have some difficulties on explaining because I havent understood properly how the software thinks.
My drone is running firmware 3.3 (latest stable version), while
Read more…Hello everybody,
I'm trying to fly my exa in autotune flight mode, unfortunately during my indoor test I can't invoke it.
As you can see in the attached imagery once I switch on flight mode 3 pixhawk refuses to accept this mode and keeps the previous o
Read more…Hello,
it's been a while since my last discussion, especially because I have been very busy building up my hexa and during this period I haven't had any particular issue.
so far so good until three days ago when I tried my first take off, basically whe
Read more…Hello,
it's been a while since my last discussion, especially because I have been very busy building up my hexa and during this period I haven't had any particular issue.
so far so good until three days ago when I tried my first take off, basically whe
Read more…Is there some kind of device which guarantees Long range Connection?
Something with no latentcy.
Something like lightbridge of DJI.
Read more…is it possible to use the SOLO controller with any pixhawk powered drone?
Read more…I was wondering if this kind of esc can be plugged in my pixhawk, I'm not using the PCB of 3DR so the three pin (ground, power and signal) goes directly in to my pixhawk.
This kind of esc has both esc and bec functionality, but I was wondering if in
Read more…Is there anyone who knows how to match the GPS and IMU data with the photos acquired during a flight?
Read more…