Gender
Male
About
Location
South Australia
Please tell us a bit about your UAV interest
S500 quad, apm
Hometown:
Adelaide
Activity Feed
This is SidePilot's biggest release yet, with the highlight for the DIY community being generic BLE module support (HM-10, etc)!Now, using a cheap bluetooth 4.0 module, you can connect and control your Arducopter (Basic PX4 support) drone with your…
Hi! Version 1.22 was just released of SidePilot, the iOS Groundstation app for Arducopter (Inlcuding 3DR Solo) and PX4New features include:Save video to camera roll (Using 3DR Solo)Better Fullscreen videoDedicated Shots buttonOffline…
Hi! Version 1.20 was just released of SidePilot, the iOS Groundstation app for Arducopter and PX4 and Solo!This version bring 3DR Solo support including live Video streaming (including GoPro shutter & mode control), as well as survey waypoints (grid…
"@UAS_Pilot I do not have one of those to be able to test it out, however I dont believe it will work. The Bluetooth format is currently restricted to the RedBear BLE Mini, which is what is inside the BLE Repeater I sell.
Thanks!
Tom"
Thanks!
Tom"
"@LIVRELLI
Bad timing, I took the board down for about 5 minutes for an update. It is back now.
Thanks,
Tom"
Bad timing, I took the board down for about 5 minutes for an update. It is back now.
Thanks,
Tom"
"@LIVRELLI Noel
Hi! I have posted a getting started guide on the forums at http://sidepilot.net/forum/viewtopic.php?f=6&t=19
If you have any issues please post on the forums and I can help you.
Thanks!
Tom"
Hi! I have posted a getting started guide on the forums at http://sidepilot.net/forum/viewtopic.php?f=6&t=19
If you have any issues please post on the forums and I can help you.
Thanks!
Tom"
Hi! Version 1.1 was just released of SidePilot, the iOS Groundstation app for Arducopter and PX4 (formerly called iMavlink).New features include: New Name!Easy PID Tuning using slidersCalibrate Radio trimsIncreased PX4 SupportSet Flight ModesArrow…
"@Crady no sorry, I developed this as an iOS alternative to the existing Tower app on android. I'm not looking to port it anytime soon. Thanks!"
Hi!As some may know, I have been working on a new iOS based GCS called iMavlink. I have just released the version 1.0 of the app! As you can see, the app is has a clean and simple UI, with many features.Features:GPS Location of droneSet, edit and…
"Hi guys, just an update that I have now got a version that supports UDP connections. I need some beta testers to see how well it works. Please email me at tom@imavlink.com for beta access.
Thanks!!"
Thanks!!"
"Hi Euan,
The app only supports Bluetooth 4.0 Low energy, as the crossfire uses an older Bluetooth system it won't be supported.
Thanks, Tom"
The app only supports Bluetooth 4.0 Low energy, as the crossfire uses an older Bluetooth system it won't be supported.
Thanks, Tom"
"Correct Steve, It is not capable of UDP connections at the moment, however if you connect a radio telemetry module to the solo, it should be able to connect then.
Thanks"
Thanks"
"Hi Stephan, I have not yet looked into that, however it should be possible, I may give it a go one the current app is worked out. Thanks for the suggestion!"
"Thanks Glenn, please email me at tom@imavlink.com
Cheers!"
Cheers!"
As some of you may know, I have been working on a GCS for iOS devices called iMavlink.It is currently in its final stages before release, but I would really like to have some beta testers to squish the final bugs.If you are interested, I am…
"Lots of progress, the app is coming along well. Since this post I have added better BLE Support, Voice alerts, battery and accelerometer calibration and many other small things. Also I am currently working on getting Follow Me working. The app…"
