Hi,
I am using APM:Copter v3.4.2 together with QGroundcontrol v3.0.2 on a pixhawk - I want to deploy a parachute. I configured channel 7 on my radio to trigger the parachute, which seems to work (according to the log messages, which says "Info: Parach
Read more…Hello,
Read more…I have been merging a branch into the latest master of PX4. It seems like the master has moved to mavlink v2.0. I created a custom dialect and generated the headers, made the necessary changes for the custom headers to be used. I am running int
hello everybody. i need suggestion
i wanna build a quadcopter with this following spec.. can it be done?
1. q330 totem frame
2. esc 20a
3. motor 920kv
4. prop 9450
5. battery 5200 mah multistar..
just wondering can i build with this spec? i dont really like
Read more…Hey Guys
I hope all is well.
I need some help. i plan on getting a parrot disco and want to install arduplane on it.
Im wondering is the skycontroller can be used as the rc yet. Or do i stil need a seperate rc. Also, how does the fpv system work with Ar
Read more…We have a Ping2020 ADS-B Transciever and have run into the issue of not enough ports on the Pixhawk. We have 2 GPS units occupying the GPS and Serial Ports, an i2C daughter board for the second Magnetometer, a 3DR Telemetry radio in Telemetry port 2
Read more…This is a small introduction on how use Dronekit applications with the Sky Drone FPV 2 system.
Sky Drone FPV supports the Dronekit framework out of the box and makes it easier than ever for developers to create applications for autonomous drone contro
Read more…HI whenever i try to run the SmartCamera in mavproxy (precisionland.py) for sitl use, Mavproxy returns with an import error "No module named sc_config".
Can anyone help me with this ?
Read more…I put together a list of 60+ sUAS training courses, both online and in-person: http://dronebusinessmarketer.com/drone-training/
Just thought it might help some of you find training if you're looking for it.
Read more…Hey guys i just received my pixhawk in the mail yesterday. Started setting it up and reading through the wiki.....i could not believe what all you can do with this thing!!
Its absolutely amazing. I am so excited to use it and experience all it can do.
Read more…Recently, some hobbiest take video of Skywalker EVE-2000. Now I share some photo with you,
The first video is about taking off and landing of Skywalker EVE-2000. The second vedio is one hobbist fly across the mist. The scenery is really char
Read more…Hi DIY.
Thanks for providing such a great forum for exchanging experience with arial drones. This has already proven a very helpful resource. I'm working on a Makani like kite energy project, but for now I'm just trying to get my Wing Wing Z84 out fl
I have tuned the settings in my controller for best performance.
Now I need to change the 4 AA batteries in the SPECTRUM DX6i controller.
Does anyone know if the program settings are retained when the batteries
are changed in this con
Read more…I have an Inspire camera drone and I am fitting a lens that does not have a power zoom. So I need help fabricating a remote servo to twist the zoom ring.
I will be making something like this:
https://grabcad.com/library/remote-control-servo-controlled-
Read more…Hi,
I have a Hobbyking PDB which includes a power module on it. It's been working fine for a week but today it fried 2 of my pixhawk clones. Upon closer examination, the power module is outputting raw battery voltage and since I had a 4s battery plugg
Read more…Hi all,
I'm trying to connect an Arduino micro to the Pixhawk through the i2c port.
Actually it doesn't works, I think it depends on voltage levels of the i2c bus.
The Pixhawk connections are shown on the following link:
http://ardupilot.org/copter/docs/
Hope you guys all have a great day! ...here i am after days of research about quadrocopter parts. I wantto build my first one and finally managed to write down what I plan on using for it:
Frame: Quantum XJ470 https://hobbyking.com/en_us/quanum-xj470
Read more…Hey everyone,
This might sound like a bit of a crazy idea, but that's what we're here for! Anyway, I'd love to build an autopilot system for my Zenith 601 HDS using Drone parts. Here's a link to give you an idea of what the plane looks and performs li
Dear users,
we are about to buy an NDVI upgrade for the Inspire 1. There are several providers and maybe you can give us a hint about Sentera:
Do you know, if Sentera is delivering to Germany and how long that takes?
On their website they only offer an
Read more…Hello,
i built quadcopter from scratch, including flight controller written in C and run on raspberry pi 3.
there have special design and battery is all over the body tubes and inverted props.
first please see my video:
The problem is i feel like the qu
Read more…I have a DJI S900 for a design project along with an A2 receiver, 2 DSM2 satellites plugged into the receiver, and a Spektrum Dx6i Transmitter. When we go to bind the remote the satellite lights blink and we hit the bind switch on the RC and all blin
Read more…