It appears that there is no delay available for rover waypoints.
If this is true, is there a workaround?
If it is available (there is no visible column label) how do I enter a 5 second delay?
Thanks
Read more…Hi teamI am wondering where ArduRover is at with mechanical brakes - does it currently only support motor brakes?Thanks.
Read more…Hi All,
Before I pull the rest of my hair out, can anyone confirm for me that the joystick does not work for steering or throttle and that python scripts do not work. Using MP 1.2.98.(3) beta scripts don't crash MP anymore but they also don't do anyth
Read more…I think I've followed all the correct procedures. I can successfully set my servo low, high and toggle manually from mission planner flight data screen, but I cannot do so from within a mission between 2 waypoints.
So I'm sorry if this is a really st
Read more…I have a Dimension Engineering "Doubleswitch" R/C relay on my Pixhawk controlled rover. I need to turn this relay on at a waypoint during the rover's mission.
So far I've done the following;
1) Set the BRD_PWM_COUNT to 2.
2) Plug the 3 pin cord from the
Read more…Hey guys,
I guess I should start by asking if anyone in this group has had any luck using a DroneCell for telemetry with APMrover2?
At the moment, I have all of the hardware setup and working, I'm just having problems on the coding end of things. I've
Read more…Is there any trick to get a rover to turn about its middle. I've set the skid steer IN to 0, the skid steer OUT to 1 and the steer2srv_p to 1/2 the distance between my drive wheel. It drives OK but I can't make the rover turn hard on the spot.
Thanks
Read more…Hello Guys,
Has anyone successfully been able to manually control their ArduRover over serial connection without a radio transmitter. I am looking to control my rover with a joystick connected to either QGroundControl or HK GCS. I have also tried enab
Read more…Hi All,
I have been tuning up my APM2.5 equipped Slash brushless 1/10 scale autonomous rover on my new pre-school parking lot test course. Tridge, Linus, and I are continually improving and testing the ArduRover2 firmware in anticipation of the upcom
Read more…I've just assembled my rover with the Pixhawk kit which included the GPS and PPM encoder. The GPS is mounted 5+ inches above the top of the rover. Inside the rover is a Dimension Engineering 60 amp motor controller and 2 17AH batteries.
After runnng t
Read more…i have a project in mind involving my tractor and my farming operation. what i want to do is use gps to steer the tractor for me (that i will be riding in at all times!) so i can focus on other tasks while doing tillage and planting. it will only h
Read more…Hello,
Alright, I'm currently running the latest Rover FW 2.45 and I'm trying to setup a external LED for GPS status. I've read on the forums about assigning a value for the LED_MODE under adv parameters in MP but I can not find it. I have even search
Read more…Hi everyone, I'm new to APMrover.
Now I want to make my car follow with another car automatically. I want to mount a camera as the "eye" for one car, and make this car follow with another car by using its "eye".
Do I need program the code? Actually,
Read more…Hi allI'm making a test rover too before moving it to something faster, but I'm problems.I'm using:4 c futaba controllerDuel sabertooth brush controller2x brush motorAPM 2.6 complete systemProblems:when I setup everything and is link directly [usb ca
Read more…Hi,
I have had my rover implementation and it's 3DR Ublox LEA-6H GPS/compass working great for the last few months.
Recently I installed two AEG airsoft guns (I know, I know, boys and their toys!), and now the magnetomer is wildly affected by the AEG m
Read more…Hi all,
I'm currently use a mix of sharp analog infrared distance sensors with my rover solution. These have been calibrated and yet, particularly for one of the sensors, the readings tend to fluctuate wildly. Maybe I need to introduce some smoothin
Read more…Hi,
does anyone have experience in combining a rover with a sensor that measures radioactivity? i thought i have my rover moving across a field, stop here and there and measure the dosis.
Read more…Hi,
I've integrated an APM2.6 with 3DR GPS and RFD900 telemetry on a small vehicle.
Firmware installed successfully and i tried to navigate in a triangle in a parking lot to see the guidance in action, However each time i turn to AUTO mode and start th
Read more…I was wondering why compassmot hasn't been integrated into the rover code. I read the comment that says it's not needed but I've been testing a rover with some BIG motors drawing lots of amps and I can tell you that the compass reading can shift as
Read more…The APM:Rover team is delighted to announce the release of APM:Rover version 2.44
Please see the release announcement for details
Cheers, Tridge
Read more…