Does anybody know whether or not a UGCS flight route can be uploaded to a drone using a LAN local area network connection or does it require an internet network connection?Thanks in advance,Steve
Read more…I have UgCS One (2.13.537) and created a route. The first 2 waypoints did not have a change yaw command, then the next 3 waypoints had a change yaw command, and then the following waypoints had no change yaw command. The turn types were all 'Bank Tur
Read more…Anyone had any luck disabling no fly zones? I have a waiver for the area and need to fly near the airport, but can't seem to disable the zone as it shows in the manual. TIA
Read more…Is It possible to do a photogrammetry mission with the camera pointing only one direction ? One constant compass heading Not the direction the drone is traveling
Read more…What coordinate system is used by UgCS? I want to export conventional survey and scan data to a geotiff to import into UgCS. Every projection/verision of WGS84 that I have used either errors out or put me thousands of miles away from my site in Alask
Read more…Hello everybody!
I have read the information from the following link:
https://www.ugcs.com/en/page/how-to-enable-shutter-control-on-dji-a3-n3-and-m600
I understand that with the A3 / DJI M600 you can only trigger a shutter event directly in a waypoint.
I
I saw on my Android device this morning that there was an update to the app, and it mentioned being able to store the missions on the Android device and fly in the field without a laptop - that's a great development! I have a couple other questions,
Read more…Hello,
I have noticed before but it hasn't been too much of an issue until now.
Can anyone tell me why it has extended the lines beyond the edge of the survey block (in the middle area). This is a completely un-necessary area to cover and over houses w
Read more…Hi,
I am trying to establish a TCP connection with UgCS and send Mavlink messages acting like ardupilot.
I am currently connected on port 5762 and sending a heartbeat message, a vehicle is being added to UgCS but I never get any downlink or uplink co
Read more…I've noticed that when analyzing flight logs with geotagged images, you're able to display the image centers. Is there a way to display the full image under that center?
Read more…Hello there,
over the past year the RAW image trigger time with our Phantom 4 "PRO" has increased from 1 image every 2.x seconds to 4s. In early 2017 it was still possible to dial in any number for the trigger speed in UgCS and if you went too low/too
Read more…Is anyone having issues with exporting telemetry and geo-tagging photos since the last update (2.13(401)).
I'm using a M600 PRO, A3, LB2. the missions work perfectly and everything else is super stable, as always, but when I try to export the telemetr
Read more…Just updated to the latest version.
Did a few test flights and the speed of the drone is sometimes -1 of the targeted flight speed.
Anyone have this problem too?
Read more…Hi,
I try to connect UgCS with my P4P, Samsung Galaxy Prime, and my windows Surface 2 Pro.
Everything seems to be ok:
Hi,
I am trying to get my flight logs together ready for my CAA renewal and it looks like i havent got any record of my UGCS flights within DJI nor Airdata. Now i am missing several months of logs!
Is there any future compatibility between DJI and/or
Read more…Happy New year to everyone.
Is it possible to export the track log from the telemetry? any file format will do GPX, KML, KMZ etc.. really need this so I can send it to the client to show the exact area we surveyed.
Cheers
Rob.
Read more…Hello all, I seem to be having an issue with the DEM while planning a photogrammetry mission.
When planning a photogrammetry mission today it seemed to be giving me a strange terrain following solution when using 0, 90, 180, 270 or anything close to t
Read more…Untill now, I connected UgCS 11.250 / UgCS Android and I could control my flights OK BUT with no video return thought Light Bridge 2 - even though I can see the video using DJI Go4.
I decided to update both UgCS desktop (done with licence activation)
Read more…Matrice 200, Zenmuse XT Radiometric 13mm V2 with gimbal adapter, and X4S.
Anyone know the information to add the Zenmuse XT 13mm Radiometric 13mm V2 camera to the payload list in UGCS? I think I have all info except the sensor width and height.
Need:
1.
Read more…I installed the Android application I use a multirotor with a dji A3 I have a problem I have no indication of battery level
Read more…