In the past we have had issues with the UgCS for DJI not connecting to the laptop.
From reading some of these discussions we are not alone.
Is there any thought of connecting the PC running UgCS directly with the transmitter via USB? You would be tethe
Read more…Hi, I just discovered the mission DAT files on my android tablet running UgCS for DJI.
These seem to be different to the DJI DAT files stored on the drone itself. I tried uploading them to CsvView to convert to a CSV file but it wouldn't read it. Is t
Read more…I was working with UgCS for single pixhawk. It was working fine and then I tried to use UgCS .Net SDK to receive the telemetry data and succeeded.
Later I wanted to go for multiple pixhawk.
At first, I connected my pixhawk and my laptop with the 433Mh
Read more…Is there any documentation or tutorials on UgCS Mapper? I DL'd UgCS Mapper and tried it on a few different data sets which matched closely to Agisoft's camera alignments. I just didn't really see much of a time improvement in photo matching between t
Read more…I'm working on pixhawk with UgCS .Net SDK.I could connect to UgCS Server and receive telemetry values of the pixhawk.When I try to connect multiple pixhawk, I fail.UgCS connects to the latest pixhawk it detects and doesn't show the values of the firs
Read more…I started to work with UgCS client and server a couple of days back.
I could create connection to the UgCS server and I could also subscribe to the vehicle to receive telemetry data.
Problem is, When I receive the telemetry data, it is not complete.
F
Read more…I am creating a new route programmatically, and I am successful in adding that to the server. However, when I open the mission in the UGCS client, they seem to have transformed into other values, and can't find the elevation. Is there a transformatio
Read more…I’m getting an error that the radius of the mission is above the acceptable limit. Never seen this before. I did run a firmware update on my dji inspire 1 pro. any ideas. Im in the field and cannot fly
Read more…I'm completely new to this platform coding for drone flight management using .Net
But I'm not new to .Net.
I tried to follow the steps mentioned in .Net SDK under the link provided below.
https://github.com/ugcs/ugcs-dotnet-sdk
I could see the pixhawk c
Read more…I'd like to fly more than one emulated drone simultaneously. The website says that I can fly "unlimited multi-drones", which I would like to think includes emulated ones (as they are important to avoid later collisions between multiple drones in the
Read more…Feature request. Have UGCS auto calculate a safe RTL AGL altitude. This would consider situations where RTL might be triggered via loss of telemetry or low battery on the back of a hill, as the RTL is relative to the home location, it would need to b
Read more…Hi,
It looks like the DJI devices have the limits of 99 waypoints. Is it possible to extend this limits if I use ugcs SDK? Or any other way to work around?
Ang comment is appreciate.
Thanks,
Read more…Hi,
I'd like to be able to process the telemetry data contained within the telemetry and telemetryField tables within C:\Users\<user>\AppData\Local\UGCS\db\sqlite\telemetry.db.
Unfortunately, my sqlite client is telling me the "value" column of the te
Read more…I am using the SDK to implement a full mission, including uploading a new route. The attached code Program.cs is heavily based on the Console example in the SDK. however, when I try to upload the new route, I get the exception "Action requires exclus
Read more…Hello
I can't seem to connect to my vehicle via udp/wifi connection. I can connect with both mission planner and qcg with my setup
My setup is as follows
pix2
raspberry pi 3 (handles networking and mav proxy)
quad plane running arduplane 3.7
futaba t8fg su
Read more…If you are in auto mode, your drone will continue the mission until it hits the default 10% at which point it will auto-land wherever it is located (in my case, would be a tree canopy). A huge risk if you conduct missions outside of telemetry range,
Read more…Hello all,
Happy to see the release of the UgCS for DJI app with compatibility for the Phantom 4 Pro.
After installing, I ran into issues connecting the P4 pro to the android app, yet the Matrice 600 connected fine. I've tried using it on a Samsung Ga
Read more…Hi,
I'm trying to use UgCS .NET SDK to control my DJI Phantom 3 Pro. I wanted to start with the most basic functionality - arm/disarm. I am able to connect to the UgCS server, get the list of vehicles and select the P3P, but then when I send the Arm c
Read more…Hi all.
I'm having trouble with an Inspire2 photogrametric mission. When I try to start (auto mode) it shows the following message:
Auto mode failed - the radius of mission is over the acceptable limit.
If I takeoff in manual mode, I see I cant go fu
Dear UgCS programmers,
The spanish text strings file strings_es.properties, although generally speaking is quite correct, there are plenty of minor errors and some others (not so minor) in translation.
I speak (and write) several languages and hav
Read more…