"Thanks Doug!"

"Quick question in the autopilot code version 2.5_04, where is it to set the autopilot to have it at full throttle? I changed a few values in the hearder file in section 9."

"So the ardupilot does not catch the control signals coming from the radio controller (except for the control pin #5), and are wired directly to the output. Oh ok I see now looking from the diagram. I will recheck everything and fix any solder point…"

"That's my problem I do not have elevator control. It is setup as show in the diagram. I have throttle and ailerons control but no elevator control."

"I am having an issue with the ArduPilot passing the RC control single to the servos. I have it setup as described in the manual. Ailerons are on channel 1, flaps on 2, and throttle on 3. Running the latest version out, 2.5_04, in the terminal it…"

"My teammates and I are having a hard time trying to get a GPS lock. We are using the EM406 and the ardupilot version 25_04. We've also tried the raw_GPS_tester and no luck. We have gone through the source code and found that the statement…"

"@Florin, I am having the same problem with it on my laptop. I think it might possibly be your firewall is blocking the program from accessing google maps. Another possiblity is that the ConfigTool uses the .Net Framework. You could try…"

"I want your thoughts on the Parkflyer Cessna 182 RTF as a platform for the Ardupilot. My teammates and I are concerned that it won't provide enough lifting power with everything onboard (ardupilot, two Lipo batteries, a small 2.4Ghz micro camera,…"

"When I power up the board with no GPS it goes into stabilization mode, the yellow status light blinks like it should indicating that the autopilot is running. Two nights ago I thought I got a GPS lock when I plugged the EM406 into the red ardupilot…"

"Thank you for getting back to me on the RC controller. I have a friend that will let me burrow his 6ch controller. I am still having trouble getting a GPS lock. I have the ardupilot hooked up to my laptop for programming. In my header i have the…"

"I am having a similar problem with getting a GPS lock. I have the EM406 GPS and I have the GPS protocol set to 1. The red light on the GPS is very very dim, and the blue LED on the shield board is flashing away trying to get a lock.

I've checked…"

"Have a question, I am working on a UAV for a school project and the plane I have for the platform is the Cessna 182 complete kit. It came with a 4ch controller and the plane has a 6ch receiver. I wanted to know how can I have the autopilot be switch…"