Gender
Male
About
Location
Olivia, MN
About Me:
A Farmer building a VTOL UAV
Please tell us a bit about your UAV interest
Safe to be near very durable VTOV UAV that could be used for many jobs from photography to tree trimming. I'm now working on the second prototype.
Activity Feed
"Enrico
The first of the many tasks I would like to accomplish is precision photos of crops and the Autoquad is ready to do what now. The rest of the tasks are closer to the ground so the Autoquad will need more sensors and more precise GPS to do…"
The first of the many tasks I would like to accomplish is precision photos of crops and the Autoquad is ready to do what now. The rest of the tasks are closer to the ground so the Autoquad will need more sensors and more precise GPS to do…"
"Hi
I have an Autoquad Cube challenge to post. I'm a farmer and as soon I saw the first quad I knew that I wanted to use that type of aircraft as a tool for farming. For the last seven years I've built multicopters using many of the opensource…"
I have an Autoquad Cube challenge to post. I'm a farmer and as soon I saw the first quad I knew that I wanted to use that type of aircraft as a tool for farming. For the last seven years I've built multicopters using many of the opensource…"
"I have a cube ready to post. The KML and on board video are ready. What information do you wan't?
What is the prize?"
What is the prize?"
"There are other pilots with autopilot that are ready to compete but what is the prize?"
"Andrew
I'm using the 3D radios on a APM 2 octo and a Autoquad octo at 115k baud. I really miss having them. I ordered a new set yesterday but I could use both sets.
Larry"
I'm using the 3D radios on a APM 2 octo and a Autoquad octo at 115k baud. I really miss having them. I ordered a new set yesterday but I could use both sets.
Larry"
The 3D radios have worked very well for 6 weeks and after a little crash the air module has the red LED on solid and no green LED. I've tried to connect to 3D config and I get "failed to enter command mode". The ground module connects and I can…
"A VVP copter is not very easy. First you need four ESCs that have good governors, hard to find. Or your can use one motor to drive all motors. If you have all props turning at the same RPM than you can adjust the servos so 1000 micro seconds…"
"Tks
If your asking this question you have a lot of learning to do about RC stuff. If you can get a programming card for your ESCs you will find it helpful. Throttle calibration is very simple with a RC Transmitter and receiver. You tube has videos…"
If your asking this question you have a lot of learning to do about RC stuff. If you can get a programming card for your ESCs you will find it helpful. Throttle calibration is very simple with a RC Transmitter and receiver. You tube has videos…"
"Bill
Just checking. An altitude sensor with an output of around 100Hz could be used with autoquad?"
Just checking. An altitude sensor with an output of around 100Hz could be used with autoquad?"
"Bill
Now I think you've answered all my questions, what is until I get a Autoquad board!
Larry"
Now I think you've answered all my questions, what is until I get a Autoquad board!
Larry"
"Let me assure you I do not think anyone on this team is just sitting on there hands. Most of the commercial Autopilot people write-off the MPU 6000 as a toy sensor. So I thought I ask. "
"Norbert
Has the team look into using the MPU 6000? AMP2 and Openpilots CC3D are using them with good results."
Has the team look into using the MPU 6000? AMP2 and Openpilots CC3D are using them with good results."
"For six years I've been looking for a autopilot that would have the functionality that AQ autopilot appears to have attained. It's interesting that it will be released just a day ahead of the July 4 "Independence day". I believe that this autopilot…"
