Gender
Male
About
Location
Walla Walla, WA
Activity Feed
"My IMU V2 is doing this all the time now. But in my case the green power stays lit as it should, and the yellow status light is on too. Even after the IMU resets when uploading the code, the green and yellow lights stay lit. In fact if I rotate the…"
"I get that every once in a while. I will select Comm 6(in my case), then I need to unplug the FTDI Cable, and plug it back in. Then you need to wait until the IMU powers up completely(blinking led's and all, code loaded and running), then it should…"
"@ Chris, thanks for that, thought it was me... =]"
"OK, so I was able to fix my failed header pin fiasco... Trust me when I tell you, it was a whole lot of fun. So with that out of the way, I was able to do some testing. I loaded the 2.4 code, hooked up my AR7000, a couple servos, and an ESC, IT…"
"How about some sandwiched composite material? I have some of this stuff for a Rocket I'm in the middle of building. It's nomex honeycomb, and thin G-10 fiberglass bonded, it's strong, and lightweight. Might be an option...…"
"My kitchen table if chock full of baked goods for the last couple of days(tis the season I guess), so I haven't had a chance to desolder my mess, and fix it. Feeling bored, I was rummaging around the house, and I found the charging plug that came…"
"Thanks, I like to share my screw ups, it usually helps someone... Like this one I failed to mention. When I soldered everything on, it helps to LOAD THE FREAKING CODE... I went through plenty of cigarettes out in the 20 degree temps we had today…"
"Try these links:
Link #1
Link #2
Link #3"
Link #1
Link #2
Link #3"
Well the day has come, my Shield V2 arrived, and I have all the parts necessary to start building my UAV control system. This is just a documentation if you will, of my progress, hope, dreams...etc. I've been reading this site on & off for a year or…
"Good to hear she flew Doug... I'm working on my setup right now, and awaiting for my shield to arrive... :)"
"I'm waiting for the damn FedEx truck to get here, I shipped my IMU's from Washington... BOO!!!!!"
"You are wanting something similar to this right?
That would be neat, setting a point for the camera to look at, ands while it flies it's mission, the camera stays centered on the object you selected.
I don't know what camera they are using or…"
That would be neat, setting a point for the camera to look at, ands while it flies it's mission, the camera stays centered on the object you selected.
I don't know what camera they are using or…"
"Sweet! Make 2, let me know what I owe ya! lol"
"What about a replacement canopy for the Easy Star that can hold the ArduPilot, & shield in one unit to free up some space? Maybe just a few holes so the servo wires and pitot hose can pass through to the boards...
I'd buy one. =]"
I'd buy one. =]"
"There we go..."
"Damn, that didn't work out so well...
ArduIMUV2_DCM_V10.zip
Maybe that will work?"
ArduIMUV2_DCM_V10.zip
Maybe that will work?"
