About

Gender

Male


Location

Stockholm


About Me:

Fly FPV and have way to many projects


Please tell us a bit about your UAV interest

I have an APM quad and a Twinstar thats about to be maiden with APM 2.5


Hometown:

Stockholm


Activity Feed

Calle replied to Matt's discussion Show your setup! in FX-61 Phantom
"Nice!
I have an idea of making a light mount on the underside where the camera is protected and out of the way. Your idea is pretty simple and good though!

Please share a map photo when you have the chance!

Calle"
Feb 26, 2014
Calle replied to Matt's discussion Show your setup! in FX-61 Phantom
"Hello,

I have just added a Phantom to my APM planes. Im about to start the build and will update my setup here.

Im also thinking of adding a mapping camera later to my Phantom. I would be really nice if you are willing to share your ideas on how…"
Feb 12, 2014
Calle commented on Euan Ramsay's blog post Autotune:0...Ground:2
"By the way, I did a loiter endurance test in abit of wind and I hovered for almost 17min! (1000sek)
I had only 7 sats due to bad GPS placement but i didnt touch the sticks for the whole time.. Calculated mah in MP was approx 3000mah in 4 degrees…"
Feb 7, 2014
Calle commented on Euan Ramsay's blog post Autotune:0...Ground:2
"Hey all,

Ok it took awhile to run the autotune and it worked flawlessly the first time! Well, Im not that happy with the pids but that is a different story. It feels more sluggish now but it was overshooting before so. It still works good and no…"
Feb 1, 2014
Calle commented on Euan Ramsay's blog post Autotune:0...Ground:2
"Im about to do an autotune with my TBS disco as soon as I have reinstalled my APM(in a box with status lights etc). Its a couple of days ahead because of work though. Im running SimonK 20a blue mystery escs that have 50h flight time ie. proven to…"
Jan 13, 2014
Calle commented on Euan Ramsay's blog post Autotune:0...Ground:2
"WARNING! We have had several failures with the Opto ESC from RCTimer! Many of them are soldered badly causing the ESC to get out of sync and glitch the motor. We have them on 4 Y6 and 2 quads and had one Y6 go down and one quad. I will start with…"
Jan 13, 2014
Calle replied to Andrew Tridgell's discussion APM:Plane 2.74 released
"Hey again!
I have done a bit of reading on my altitude CRUISE mode problem and it may be a feature? The FBWB_CLIMB_RATE parameter also controls CRUISE and is set on 2m/s default. On my heavy Twinstar (AUW 1.8kg) that could be a little low. I can…"
Aug 31, 2013
Calle replied to david teles's discussion 433 Mhz antennas for 3Dr radios
"Hey! You can make yourself some pretty good antennas very easy. I have a half wave dipole on the outer wing on my twinstar 2 and a regular half wave antenna on the ground. They are made with regular single servo wire. The half wave antenna is just…"
Aug 29, 2013
Calle replied to Andrew Tridgell's discussion APM:Plane 2.74 released
"Hey all!

I just tried my Twinstar with the latest 1.75b. It barely worked in FBWA , i couldnt almost nudge it. I raised P a bit and it then worked ok. I have more to do there. But, in the new excellent cruise mode i did not have any elevator at…"
Aug 28, 2013
Calle replied to Andrew Tridgell's discussion ArduPlane 2.71 released
"Hey all, I had a little crash - could it be the APM (nooo!) or was it just me/the plane?
I loaded my APM 2.5 with the new 2.71 and took my Twinstar for its maiden flight. I tripple checked everything and the flight started good in manual mode,…"
Apr 25, 2013
Calle replied to Will's discussion Altitudes in APM 2.68
"So it safe to use the plane in all modes except maybe AUTO without bringing the computer to the field? I dont really like to always set altitude to zero and bring my PC and based on what Will says i dont have to?

Regards,
Calle"
Apr 10, 2013
Calle replied to Stefan Gofferje's discussion Arduplane: Using battery voltage in flight plans
"Another thing, wouldnt it be possible to take for example, current, altitude, wind direction etc. and calculate an auto super efficient throttle rate? Like "Auto_Throttle" aka Cruise mode? WP distance could use the parameter "Auto_throttle" = 1 to…"
Apr 10, 2013
Calle replied to Andrew Tridgell's discussion ArduPlane 2.71 released
"Amazing! I will load this in my "need to maiden this weekend" Twinstar right away!

Does anyone here have a clue if a twin motor setup differs in stability with the default APM2.5 PIDS compared to a single engine setup?

Good job!"
Apr 6, 2013
Calle commented on Chris Anderson's blog post ArduPlane home page
"Hey all!

Does anyone have a param file for a Twinstar 2 airframe or have any pointers for PID adjustment, its not in the air yet with the new APM 2.5.

Regards,
Calle"
Jan 5, 2013
Calle replied to Chris Card's discussion Pitot Tube Question
"Nice tutorial!

I received mine 3 weeks ago, same problem as you and then a new replacement 1 week ago and guess what - same problem! None of the pitot tubes cant really work well without this mod right?

Im doing the same this weekend.

Thanks,
Carl"
Dec 20, 2012
Calle commented on u4eake's blog post Twinstar fpv lost and found by girls.
"Very funny! :) Im about to throw a Twinstar up in the air with arduplane and a APM 2.5. Is it possible that you share your PIDs?

Regards,
Carl"
Dec 11, 2012