Gender
Male
About
Activity Feed
"Just to add to the disconnect-motor before testing... I was testing an Ardu-variant on my R/C buggy and of course, had grown complacent with correct function and start-up. Something went wrong, the motor went full throttle on start-up, and I…"
"So, are they going to nickname it the cricket or the grasshopper?"
"Wow.. Now how did you organize it all? My workbench looks about like your before picture."
"I believe the point of the post was to bring up the fact that the Buran was the largest UAV, I would say the X-37 is a UAV.. Just not the largest."
"The X-37 is not nearly as big as the Buran and Space Shuttle Orbiter.. But the Russians pulled off a fully autonomous flight, while our orbiter has never been flown without a human pilot."
"I'm using an Associated B3 1/10th scale buggy for my rover and an original ArduPilot. I started with the "ArduPilot goes into the water" code and worked from there. I've added a compass to provide for a more accurate heading and it works great (wish…"
"I try to stick with name brands, even if it costs a little more you can generally rely on them. I have enough problems, I don't need a radio/esc/servo failure to throw off the troubleshooting process."
"I bit the bullet and bought a four channel pistol radio and receiver. Makes the process go a lot smoother.
This radio
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYYC3&P=7
Has one two position and one three position switch. I figured it would…"
This radio
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYYC3&P=7
Has one two position and one three position switch. I figured it would…"
I've seen a few interesting posts about people who have remolded the EasyStar and made their own fuselages and such, but I'm clueless as to how. I've done some searches but I don't think I'm looking for the right terms... So, how do you make your…
"I'm also setting up with a 2ch car. I've followed all the setup instructions, but when I tried to modify the code as discussed in this thread, I got nowhere. I'm assuming it was a previous version of the code that was talked about, because I can't…"
"Any way you can make a tutorial out of this? This is a pretty cool process."
