About

Gender

Male


Location

Munich


About Me:

Pitch or die ;-)


Please tell us a bit about your UAV interest

Well, I am about 30 years in RC flying, now it's time to relax and let "others" do the job :-D


Activity Feed

ChrisB replied to Matt's discussion Show your setup! in FX-61 Phantom
"this is just "wow". Very nice!You must report, how that flies.

I am a bit jalous ;-)

Best regards,

Chris"
Feb 26, 2014
ChrisB posted a discussion in FX-61 Phantom
Hi there,first, thanks for let me join the group.I have the FX-61 Phantom in standard setup, but with a new motor. I am running it with the D3542/5, 1250 KV, from HK at 3S. This is fair enough, it goes straight up and has enough reserves.Last week,…
Oct 27, 2013
ChrisB posted a discussion
Hi,I have tuned my APM2.5 for my Phantom FX-61. Everything is fine, but when I switch from Stabi tp RTL or Loiter the motor stops for 0.5 - 1 second. What do I need to do to avoid this?1 second without throttle can be already too long…
Sep 28, 2013
ChrisB posted a discussion in ArduPlane User Group
Hi,does anybody have already tuned the AMP2.5 for the Phantom FX-61 from Zeta, sold by Hobbyking?I have flown today my Phantom with my APM2.5, but I am not sure if I a able to do the fine tunings.Regards,Chris
Sep 8, 2013
ChrisB left a comment for ChrisB
"Hi Randy

thanks for your quick response. Which returns the most accurate value? RelAlt or Alt?

Cheers,

Chris"
May 12, 2013
ChrisB left a comment for Randy
"Hi Randy,

first of all, thanks a lot for your brilliant and impressive tutorial vids you have created. This brought many steps forward. One question I have, and I coudn't find the answer in the wiki or in the forum. In the log file, what ist the…"
May 11, 2013
ChrisB commented on Chris Anderson's blog post Tutorial on using dataflash (onboard datalogging) records
"Brilliant, Randy!"
May 10, 2013
ChrisB posted a discussion in ArduPlane User Group
Hi all,Now, after some ups and downs, my APM2.5 is working wel... but I have an issue with the log files.The APM's GPS is working, RTL works beautiful, but in the log files I am missing *.tlog and *.gpx files. The only files I get are *.log and…
May 5, 2013
ChrisB posted a discussion in German Ardu-Group
Hallo zusammen,ich habe mit meinem APM 2.5 das Problem, dass er mir keine *.gpx Dateien mehr loggt. Anfangs hat er es gemacht, ich habe bestimmt irgendwas verstellt, jetzt macht er es nicht mehr.Er loggt *.log dateien mit, aber diese manuell…
May 5, 2013
ChrisB replied to ChrisB's discussion APM2.5 doesn't work properly in ArduPlane User Group
"Hi again,I have now updated to V2.72. When I switch the APM on in manual mode, it is fine. When I switch to stabilize it stabilizes but only with very small amplitude when tilting the plane. When I switch back to manual, the APM stays in…"
Apr 29, 2013
ChrisB posted a discussion in ArduPlane User Group
Hi all,today I again tried my APM2.5. Unfortunately it didn't work correctly. After switching it on all was fine for soe time, maybe a minute. then, it was switched to manual, the motor started and the plane was somehow in stabilization mode, but I…
Apr 28, 2013
ChrisB posted a discussion in ArduPlane User Group
Hi all,still having problems setting up my APM2.5 for planes. Today I was testing and testing. Now, there are no logs in the APM memory. What am I doing wrong? Is logging switched of? Where can I switch it on again?Regards,Chris
Apr 21, 2013
ChrisB posted a discussion in ArduPlane User Group
Hi all,first, sorry for sending erverybody a message, my fault :-/I don't know, if this is the rigth place to post, but I'll give it a try.Today I tried my APM2.5 on my plane (Walrus from HK).Manual mode was okya, stabilisation was okay, but RTL and…
Apr 14, 2013
ChrisB replied to ChrisB's discussion APM 2.5 mit ArduPlane 2.70 in German Ardu-Group
"So, nach intensiven Tests habe ich den "Fehler" herausgefunden: Der Trim für Throttle an meiner Fernsteuerung war ganz runter getrimmt. deshalb funktionierte es nicht. Jetzt habe ich den Trim auf null-Position udn alles ist fein. Kann das jemand…"
Mar 2, 2013
ChrisB posted a discussion in German Ardu-Group
Hallo zusammen,mein APM2.5 fällt sporadisch aus. Ich kann daa Querruder und Höhenruder nicht steuern. Ich habe den APM2.5 im Stabilisierungsmodus laufen und er fällt bei Sati und bei Manuell sporadisch aus. Hat jemand ne Idee?Gruß,Chris
Mar 2, 2013
ChrisB replied to ChrisB's discussion APM 2.5 funktioniert nur wenn USB angeschlossen in German Ardu-Group
"Hallo,

erstmal vielen, vielen Dank für die schnellen Antworten. Tolles Forum.

Ich habe gerade die Spannung am Ausgang der Reglers gemessen: 5,01 V im Ruhezustand. Es wundert mich also, dass ohne USB gar nichts geht. Oder gibts im Innern des…"
Feb 19, 2013
More…