Gender
Male
About
Location
Nairobi
Please tell us a bit about your UAV interest
I wanna build a multi-coptor
Hometown:
Nairobi
Activity Feed
"I agree with Euan. Sometime back i had this in mind. But after deep brainstorming, i found extremely few situations where drones would be used to deliver emergency medical supplies. Survival supplies is a practical scenario though."
The Kenya Civil Aviation Authority finally broke the silence about the use of UAVs in the Kenyan airspace. This was probably provoked a couple of drone articles and incidences that have been published recently. Just recently, a writer for a local…
"Hey. I never really got much replies but i found a way to do this. In mission planners hidden window, there is a moving base button. This should take carw of a moving groundstation. I havent tried it though."
"Hey,
I have a friend with the exact same setup as you do and the exact same problem. Did you ever figure it out? I think its something to do with the escs.
At first, the copter couldnt achieve any lift. After factory resetting the esc, the copter…"
I have a friend with the exact same setup as you do and the exact same problem. Did you ever figure it out? I think its something to do with the escs.
At first, the copter couldnt achieve any lift. After factory resetting the esc, the copter…"
"I'm thinking of connecting a Bluetooth board to the tx and RX pin on the ground. My aim is to create a telemetry bridge for tablets. With this work?"
"In my opinion, you don't need a lot of nex or SLR camera functionalities when flying. This mod for the GoPro gives most of what we would need to do with an airborne camera....with the much reduced AUW, I consider it as a great setup. The cost is…"
Hi Folks,I intend to use this camera. The cameras controls are on a RS 485 port. Any suggestions on how I could wire up a hack that will enable me to use PPM/PWM radio control to control the camera?My last resort would be to wire in a relay switch…
"This is very cool. I think it should be added to the arducopter code."
"Thanks John. Checking them out."
Today I was reading about "ABSOLUTE ALTITUDE" in mission planner. This got me thinking.....mission planner is able to get elevation data from google and guide the drone to maintain altitude relative to the real ground altitude. All this is done via…
"The main reason why I thought of TCP over Bluetooth is this...
I'm developing a community policing plan for my hood. That's about 4 square kilometers. I'm thinking of having a multi rotor that would always be on standby to assist security guards on…"
I'm developing a community policing plan for my hood. That's about 4 square kilometers. I'm thinking of having a multi rotor that would always be on standby to assist security guards on…"
"When I tested, the latency wasn't much. I got imu data almost instantly. This setup might not work for rc control for manual flight but it might be a good setup for someone looking to have multiple telemetry connections to one drone."
"im still looking for a bluetooth app that would be able to do the same. "
"The link above now works"
"I tried to achieve the same results using an android device. Check out my blog post.
http://www.diydrones.com/profiles/blogs/telemetry-bridge-using-mavc..."
http://www.diydrones.com/profiles/blogs/telemetry-bridge-using-mavc..."
Hi Folks,I have been trying out a telemetry bridge setup. The main aim is to be able to use Droid Planner/Andropilot on android or even mission planner without the telemetry module hanging around the tablet or PC.My setup is as follows:AIRBORNE: APM…
