Is the default altitude AGL or ASL (absolute altitude)? If default altitude = AGL this could explain why I keep gaining altitude while in FBW_B and AUTO.
Could someone also give me a description of what Energy/Alt PID adjustment controls or changes a
Read more…I had everything working and in the tuning phase but something has gone wrong. Even if I put it in STABILIZE while on the ground and move the plane around, roll and pitch are indicated with the attitude indicator but no servos move. I also went into
Read more…I am interested in the basics of what each of the 12 PID paramaters actualy controls and the relation of one to another.....
I have read and really have a pretty good grip on PID's, the adjustments and gain factors.
Servo - roll, pitch, yaw. Correct
Read more…The title says it all, most interested in fixed wing myself but thought the rotor wing / copter guys might like one too.
Read more…Downloaded APM 2.1.2 unzipped, opened with Arduino 0022, clicked on verify - I haven't made any changes yet - all kinds of errors.
Read more…I flew 4 missions today 1 I would consider somewhat successfull. I have tried using both APMPlanner and HK GCS.
I planned and loaded the missions verifying altitudes of waypoints and altitude of my home possition everything looks good. I write them
Read more…I have tried every way possable and can't seem to get 2.12 to load.
I first tried with APM planner 0.4.34 I found that if you update 0.4.34 to 0.4.36 you get a load but wont verify message. BTW I like the new firmware installer.
When I did get the co
Read more…I have checked and rechecked everything I can think of. When performing IMU test using the terminal it goes to:
Init Gyro**************************************
Yes my solder joints are good, I have carefully re soldered everything, inspected with a m
Read more…I have almost everything up and running. I used the APM planner to install the code into the APM the one thing I can't seem to configure is the airspeed sensor.
I am able to pull up Arduino, downloaded the latest 2.1 update, view everything but all o
Read more…I have looked through the entire thread on radio equipment and have not seen this question...I notice most of you are using ESC's, I am planning on using one of my existing planes with a .70 four stroke so I am needing to control a servo instead of
Read more…From reading all I can on this site I am looking forward to working with all of you on this project.
Here is what I am up to:
I have been flying RC for about 7+ years give or take with about a 15 year laps in there. I work for a large farm opperation
Read more…