Gender
Male
About
Location
Hendersonville, NC
Please tell us a bit about your UAV interest
Multi-copters
Hometown:
NC
Activity Feed
"Have you looks at the results of a compassmot?"
"My setup has a new and interesting problem I am curious if anyone has any input on.
I use the Tiger Motor MN4010-11 475kv motors with Tiger Motor S45A ESCs on a Tarot 650 with 16x5.4 Tiger props. Everything was great until an ESC connection came…"
I use the Tiger Motor MN4010-11 475kv motors with Tiger Motor S45A ESCs on a Tarot 650 with 16x5.4 Tiger props. Everything was great until an ESC connection came…"
"Another heads up: I use the Tiger Motor MN4010-11 475kv motors with Tiger Motor S45A ESCs and it works great....for a while. On my rig the connections between the ESC and motors got very loose over time. Initially it required significant force to…"
"If you have a target budget that would be helpful :-) "
"Any luck with this? "
"FWIW the maiden went great :)"
Greetings!I just built a new plane (mini talon) and installed a Pixhawk in it running the new 3.3 software.Initially I was getting an error I had never seen before: Error EKF PRED POS HORIZ ABS and the horizon was rolling around slowly. After some…
"One of these should be the dataflash log... think it is the .20 one2015-04-11 10-03-20.bin2015-04-11 09-53-59.bin2015-04-11 16-06-50.bin"
"Also seeing prearm bad velocity"
I fear my Pixhawk is suffering from some sort of hardware problem :(Initially all was well with my Tarot 650 quad after installing the Pixhawk. Loiter was rock solid and nothing seemed out of the ordinary. During additional testing however things…
"Just did my compassmot....If I read this correctly it is excellent! "
"Nice looking Tarot! I do have the external compass (Pixhawk), it is on a stalk and I have an extra deck/layer added to add separation between the ESCs and compass."
"In case it is relevant:
Tarot 650 frame with 680 pro motor mounts
Additional frame level/plate
Tiger Motor MN4010-11 475kv
Tiger S45A ESC
Tiger 16x5.4 props
Pixhawk (latest version of firmware as of March 2015)
5100 4S"
Tarot 650 frame with 680 pro motor mounts
Additional frame level/plate
Tiger Motor MN4010-11 475kv
Tiger S45A ESC
Tiger 16x5.4 props
Pixhawk (latest version of firmware as of March 2015)
5100 4S"
Greetings!I have about half a dozen short flights on a newly built Tarot 650 and this evening I almost lost it due to a "DCM bad heading" issue. The flight was going fine and I made the mistake of getting too much altitude and letting the craft get…
