Gender
Male
About
Location
Buenos Aires
Please tell us a bit about your UAV interest
Frame: HEXA RCT800 Motor; ax-2810q ESC: Turnigy Plus 30 amp BLHeli FC: HKPilot 32 Arducopter 3.2
Hometown:
Pilar
Activity Feed
"Hi Mirko!!!
For R4 1K y R5 2K
The software ppm encoder link https://github.com/davidbuzz/BuzzsArduinoCode/tree/master/buzz_8pwm...
For Neo 7 use 5V in VCC
Regards
Damian"
For R4 1K y R5 2K
The software ppm encoder link https://github.com/davidbuzz/BuzzsArduinoCode/tree/master/buzz_8pwm...
For Neo 7 use 5V in VCC
Regards
Damian"
"Hi Group!!!
My hardware tested
RC Receiver
Turnigy 9x 8C V2 (5v) with PPM-Encoder (Arduino nano and software Buzz)
GPS
Neo 7 (Hobbyking)
Telemetry
Bluetooth Module (5v) 115200 bps
ESC
Turnigy Plush 30A Flashed with BLHeli
Motor…"
My hardware tested
RC Receiver
Turnigy 9x 8C V2 (5v) with PPM-Encoder (Arduino nano and software Buzz)
GPS
Neo 7 (Hobbyking)
Telemetry
Bluetooth Module (5v) 115200 bps
ESC
Turnigy Plush 30A Flashed with BLHeli
Motor…"
"Hello Mirko
Thanks for developing BBBMINI is the spirit of DIY, I tell you I built the bbbmini a perforated circuit board using their schemes, works perfect now make the first flight in stabilized and had a great flight with 3.4 Dev Master, I will…"
Thanks for developing BBBMINI is the spirit of DIY, I tell you I built the bbbmini a perforated circuit board using their schemes, works perfect now make the first flight in stabilized and had a great flight with 3.4 Dev Master, I will…"
"Randy, Thanks for asking, I think that the order proposed is the right to have a reliable software.
Thanks to the whole team."
Thanks to the whole team."
"Hi Randy / Richard I wanted to comment that i was seeing many tlog of droneshare.com and those PX4 have peaks at 2500% load, which as Randy says would not have to worry. config my rct800 and went out to fly, as we say in Argentina…"
"Hi Richard when I connect the fc hkpilot32 and gps not acquired satellites is 20% when sat fix rises to 60% and peaks begin 2500%
Thank
Damian"
Thank
Damian"
"Hi Randy,
first of all congratulate you for the excellent work you do for the community of UAV, and patience with us newbies like me.
I have a question. I installed arducopter 3.2 released in my hkpilot32 / gps ublox 8m and watch one…"
first of all congratulate you for the excellent work you do for the community of UAV, and patience with us newbies like me.
I have a question. I installed arducopter 3.2 released in my hkpilot32 / gps ublox 8m and watch one…"
