I have a Micasense -RedEdge-M for sale.
https://www.ebay.co.uk/itm/332751767942
This is a demo item that was used for 5 demo flights in May.
I would be willing to offer a discount to a user from this forum.
Best
Trias
Read more…We VTOLized the Raptor E1, at the same time we further optimized the power plant to achieve 50-80 Watt power consumption at cruise speed at 16.5 m/s with 3.5 Kg payload.
All in all very happy with the conversion. If anyone interested we are taking pr
Read more…I am operating the 433 MHz radios at a narrower range ~2MHz.
I was wondering what was the right way to choose the number of channels based on frequency width of transmission
Thanks
Read more…Would like to setup a second pixhawk that would crash the plane (full down elevator) if for whatever reason the plane has deviated more than 100 m buffer from the geofence set on the main pixhawk.
This is for additional safety and would also ensure t
Read more…A small clip from the high efficiency quad using 29 inch 3 blades props running of U8 135KV motors and 6S batteries.
The setup delivers ~35 min with 16,000 6S lipo and 1.8 Kg useful payload.
More scope for extended endurance beyond 40 minutes with la
Read more…Had some trouble with a Quad setup as follows:
4x U8 135 KV
4x 29x9,5 ( 3 blade props)
4x Flame 80 ESC
With help from Leonard the new tuning produced some interesting PIDs (way off the scale) but it seems to work.
I have attached the parameter file for a
Read more…Hi,
Is there any implementation of an irridium stallite link for pixhawk,
I wonder if it would be possible to integrate this satellite transceiver https://www.iridium.com/products/details/iridium-9602
Thanks
Read more…So I have this Canon ELPH 300HS, I am using an arduino pro mini at 5v to trigger using the E38_APM script but with no luck. The camera sounds like it triggers and takes a shot but no picture is saved.
The pulse is 50ms high from arduino so I am not su
Read more…Often I would loose telemetry and it is not possible to re-establish the link while the system is flying.
Especially with auto missions it is rather frustrating if the system goes out of range and then there is no telemetry for the rest of the flight
Read more…Hi,
I am trying to setup CAM_TRIG_DIST in arduplane but there is no CH7_OPT available.
My device, an arduini mini, works fine if I use signal pass-through to the axillary channel but it doesn't get triggered with CAM_TRIG_DIST.
Thanks
I am using PIXHA
Read more…I was doing an autotune after an upgrade from apm 2.6 to pixhawk running 3.1.5.
I think it might be power related (battery).
I have attached the log if it is possible to get some feedback.
Thanks
Read more…Is it possible to add a second GPS to the pixhawk?
Only the CAN port can support the 5 pin cable
Thanks
Read more…Hi,
I have recently installed a 5.8 Ghz video transmitter on my APM 2.6 quadcopter and ever since the loiter is rather shaky, doesn't hold good position, some jitter is visible on the copter , although stabilise mode still works well.
Thanks
Read more…Hi,
Not sure if anyone else is experiencing the same problem,
but I have the latest version of mission planner in windows but the flights modes are not visible as options, ie window appears blank, nothing to choose from????
Read more…Hi,
Can anyone recommend a decent hyperspectral sensor that wouldn't weight more than 2-3kg including the data capture/storage unit.
Pre sales Customer service from a couple of manufacturers is rather appalling, they must be making a fortune.
Currentl
Read more…Hi,
Is there a trick getting the pixhawk to connect over USB/mavlink.
I got a new board arduplane firmware is complete but just can't get it to connect at all.
Thanks
Read more…It seems that once I upload arduplane on my Pixhawk I can't get to communicate over mavlink in mission planner. Firmware loading seems to work OK.
If I upload the PX4 firmware via QR I can get Mavlink in mission planner but I want to upload the ardup
Read more…Hi,
I am trying to geo tag some pictures and realised that my logs are offset by 6 days in the future.
What is the best way to fix this, any ideas?
Read more…Hi,
I am interested in using multiple ground stations for one arduplane platform.
This could be for example 2-3 computers with radio telemtry and mission planner.
The idea is to be able to have a person that can dynamically give a command to the Ardu
Read more…Hi,
Probably a very silly question but I am a bit buffled by all these AXXX tracker, ardustation,
I have a spare APM 2.5 and I would like to use it to control the pan tilt servos for an antenna.
Is this possible?
Thanks
Read more…