Gender
Male
About
Location
Petaluma, CA
About Me:
UAV Prototype Engineer at Terrafugia Inc. CoDesigner of the HIRO Action Sports Drone. CoFounder Game of Drones. Robotics developer and enthusiast. Artist, builder, maker.
Please tell us a bit about your UAV interest
Land, Air, Sea and Space. Shredding the technological envelope to realize UAVs full potential benefits to best serve humanity.
Hometown:
Petaluma
Activity Feed
"Nice! what is your full flight weight of this build?"
Hi,I have converted a Traxxas X-Maxx into a rover using the Pixhawk Cube 2 controller kit with a Here GNSS.I swapped out the original X-Maxx remote controller for an X6R receiver and Taranis QX7 radio.latest version of ArduRover firmware installed…
"Hi Antonie,
Firstly I was using the PX4 flight stack and attempting to load the Rover profile through the Airframe tab in QGroundControl and was having no luck and later abandoned the PX4 firmware for ArduRover and now everything works pretty well.…"
Firstly I was using the PX4 flight stack and attempting to load the Rover profile through the Airframe tab in QGroundControl and was having no luck and later abandoned the PX4 firmware for ArduRover and now everything works pretty well.…"
Hi all.I know this is an Adurover group, but Thought I would reach out and try my odds for some help as I'm perplexed by this problem. I have a Traxxas X-Maxx set up with a Pixhawk Cube 2.1 and the Here GPS. I'm using a Tarranis X7 remote controller…
"Hi all!
I have a Traxxas XMaxx 4wd with the Pixhawk Cube 2.1 and Here GPS. Using a Tarranis X7 controller w/ X8R SBus receiver.
Everything is set up correctly with the latest firmware 1.8.0 using the Generic Rover configuration, Steering servor in…"
I have a Traxxas XMaxx 4wd with the Pixhawk Cube 2.1 and Here GPS. Using a Tarranis X7 controller w/ X8R SBus receiver.
Everything is set up correctly with the latest firmware 1.8.0 using the Generic Rover configuration, Steering servor in…"
"Sorry to report the link https://github.com/diydrones/companion/tree/master/Ubuntu_TX1 is dead"
"I just received my Jetson Tx1 through Autodesk, really thrilled to dive deep into it's potential with drones. Anyone have experience connecting TX1 to a flight board yet? I'm just getting started but I'll do my best to post my progress and failings…"
"State of the art! Small,inexpensive,damn near indestructible. @GameofDronesCA Airframes is an ideal eye in the sky for 1st responders. http://t.co/lV441dljlt"
"A great place to fly, come on out and join the fun!"
"Fantastic! Thanks so much Mr. Bill! "
"Im having the exact same problem. Everything looks good hardware wise but no go in mission planner. Can't figure out the missing puzzle piece. Connecting from the usb not a problem. Using windows 7."
"Cool! good to know. do you have a link that I can review how to prepare 3d model files for your specific printer? Thanks!"
"Hi everyone, I have been designing body kits for all kinds of multi rotor system and have gotten requests for custom frames as well. I am on a quest to find a professional 3D printer I could move my work through. All advice very much appreciated.…"
"It's only from their app store, Just post your apps from your own websites and ignore apple altogether. Why not? Apps need to be universal anyway. "
