"Here is a sweet FPV clip of the most recent fly-in at this airfield.  It's huge.

From Makezine's recent post:
http://makezine.com/2013/12/08/how-i-started-worrying-and-learned-t..."

"Also, please keep in mind that the cost WILL go down significantly, but not necessarily during our launch and tooling-up time, and the wholesale cost of the raw material is very high, due to it's unique ballistic resistance - We are NOT using…"

"Sometimes, it's worth investing in quality.  With this design, you will never need replacement airframe parts again.  In my 1st year as a pilot, I easily spent that amount on broken landing gear, bent arms and other damaged frame elements.  However…"

"Chuck, that is the same setup I favor.  It works like a charm.   Those OEM DJI props are the best, they bend without damage and absorb a lot of damage that would hurt the motors or snap an inferior prop.  Thanks for the support and share the link!"

"We've been developing our airframe for about a year now.  It's gone through many different materials, shapes and sizes as we've honed in on the features that we most wanted in a UAV airframe - near indestructibility, works with any flight gear, can…"