"Here´s my Hexa setup:
Controller: Pixhawk
Frame: my own design
esc: T-Motor 35 A
Motors: T-Motor MN 4014 400 Kv
Propellers: foldable DJI 15x5
Distance: 980 mm
Weight: 6,5 kg (with Cam and Gimbal)
Battery : 2 x Gensace 5500 mA 6s
Flight time: 18…"
"Well,
it´s supposed to carry cams up to 1000 gr.
The weight is 1260 gr., all carbon , Tiger Motors 2 x GB4106 1 x GB54-2
AlexMos 32 bit controller
The idea behind this concept is to save the weight for retracts and can´t have any malfunctions"
"Hallo Lukas,
sorry war lange nicht mehr hier.
Wir haben einiges an Coptern gebaut, und gerne können wir uns austauschen.
Kannst gerne mal zu mir kommen, ist ja nicht weit.
"What kind of information do you need ? I can easily connect via my cell with Android 4.0.4 to droidplanner.
If i try with my nexus with Android 4.2.2 , no way.
If i start droidplanner with my nexus it just says" droidplanner was finished" and i can…"
"Hallo Wolfgang,
komme aus Rheinbach bei Bonn.Habe Multikopter in diversen Grössen.Dormagen-Rheinbach sind ca.70 km.Kannst gerne mal Samstags/Sonntags vorbeikommen,um mal ein paar Grundstzfragen für Dich zu überprüfen.
Gruss
Friedhelm"
"Hi Tony,
sorry about your crash,had the same Problem with my Octo, just felt out of the sky.
Got DX8 as well,for me it was a range Problem.I´ve already sent it to HH.
What receiver do use ?If you can,try to program a dfferent failsafe mode.
Cheers…"
"Hi Folks,
just came in ,did some test flights.Stabilize works great,rock
solid.But i can´t get atthold working,just drops down with low rev motors.Put atthold P on 0,800,makes no difference
Using Marco´s params except atthold as mentioned.Sonar is…"