Buenas, pues el tema es que me pica la curiosidad si sería posible programar una misión sin éstos elementos, básicamente marcar los puntos de referencia y que haga la misión sin control por parte humana. Un Saludo.
Read more…Hola, hoy me ha llegado el kit de 3D Radio en 900MHz y no soy capaz de conectarlos, llevo un tiempo con los modulos xbee y nunca he tenido ningún problema ni si quiera el primer día para conectarlos, pero estos módulos se me están atravesando y no co
Read more…Hola, bueno veo que no hay nada en castellano aclarando un poco la situación.
El tema es que después de pasar por las alas fijas, me interesa mucho el tema de los multicopteros, y me gustaría montar uno con la APM2 que tengo de los aviones, el tema es
Read more…I received some weeks ago by 3D Robotics an email, in which I communicated to the 400MHz telemetry kit was not available the lander for issues that have commented on this forum, but I emcontrado new information on its development, and not ask but jus
Read more…Hello, I've seen other ground stations as HK. have the function of managing a system.tracking antenna.
I wondered if APM Mission Planner has this function or are in the pipeline to implement in the future.
Hello, you did not know this configuration tool in versions prior to 1.1.42 APM MissionPlanner. You probably already there but I did not know.
I wondered what functionality would, as completely unaware.
Hello, I have seen in the Wiki that APM2 has two inputs for current sensors, I wondered howto monitor. the Mission Planner. the two batteries, as it only shows one.
I have two batteries, one for motor. and one for servos, rx and APM2. and would like t
Hello, today I received my APM2 and I have loaded the firmware 2.28 with the APM Planner1.1.38. But there is no way to detect the GPS. NO GPS continually displays.
Hola, tal como hicieron los amigos franceses, pido alguna traducción al Castellano de la Herramienta APM Planner, no se si está pensado en próximas versiones la traducción al castellano, pero pienso que tendría una acogida bastante buena, ya que somo
Read more…Hello, I am looking for a telemetry system for use in Europe. Looking for some system Iallow communication to a maximum distance of 25km. Do not know what will the best frequency but I can use any frequencies for digital modes in region 1 of the IARU
Read more…Problem anyway. APM Planner.
Hello, recently. I noticed. that in the versions. most recent. APM Planner. I can not set upcorrectly. flight modes of my APM 1280.
The problem. can be seen in the catches. I can not edit the sixth mode.
I leave. catches
Hello, I have a problem. com my APM.
Visualizing the flight data. in APM.Planner I realize that. my IMU is reversed. sideways. I mean that when the GPS connector. is toward the nose of the plane. turn on the monitor. to the contrary.
Read more…
Hello, I have an APM plate 1280 and until now never had problems loading the software on my plate from APM Planner, but today I updated to v2.251 arduplane and it gives me error checking.
(upload succeeded, But verify failed: exp 10 got C at 126 976)
I
Hello, I wonder if the outlet plate, marked in the image, allows current to power the servos and rx.
A Greeting.
Hello, I found some problems with some units Towerpro servos used for the APM, the servos are GS-90 and MG-16, Towerpro.
The problem I found is that they go mad and out of control, both manual and any other way.
However, in other units installed in the
Read more…Hello,
I've been waiting a while to be completed the development of AP and its
imu Mega, I wondered that apart from the Mega AP, IMU and the GPS, which
other material is needed to run correctly on a plane the AP. Thanks
Hola, llevo un tiempo esperando a
