"Homeschool Jay, maybe you can help me, I just built a hex with the 268KV multistar motors running Afro 20A HV ESC's and 8S power, with a pixhawk and I'm also having problems with all the motors twerking or they seem to be cutting on and off so I did…"
"Hi Paul, I never got to fly the 3DR frame, it got run over by my buddy when he pulled into my drive and crushed the frame, I am building a hex with the same motor and props and hope to finish that one in a few weeks after I recover from heart…"
I'm trying to add a LV-MaxSonar EZ3 to my X8 with the PixHawk APM with the 12C hub that came with the PixHawk, when I unplug my compass from the 12C port and add the hub then plug my compass back into the hub mission planner says my compass needs to…
https://www.youtube.com/watch?v=bNaiNNF7ZBsIMG_0224.JPGI'm going to build a quadcoper with a 3DR frame running a 8S battery and Multi Star Elite 3508-260KV motors with 13X4 carbon fiber props, if the numbers look good after I'm finished and have…
"The first time this happened I tried everything and then did everything 3DR suggested, they thought I had a bad PixHawk and was going to send me a new one, Something told me to try a new sd card, I did and that fixed the problem for about a month…"
"Never have, now I keep a formated card in my pocket while flying, To keep the micro sd card from being lost I have it taped in a SD card adapter and that taped to mini needle nose that I use to change the card with.
Try connecting the USB cable…"
"Thanks for the info Chris, your right it is easy to control with the pebble, one thing funny about my pebble, the dam thing won't keep time, I've had to reset the time every other day and its off by 15 to 20 mins, I hope its better at flying than…"
Been flying my quad with the 3.1.4 firmware without any problems but today I had a failed startup#1 Failed startup sound#2 Safety switch LED is blinking fast#3 Large LED is off#4 Right bottom green LED is on steady#5 Lower left red and blue LED is…