During rc calibration, it shows that the rc bars move with stick input. However, the control surfaces don't move. For some reason I can't get the surfaces to respond to any inputs. Please let me know what I am doing wrong. This is a fresh install of…
"No, this is the rxrssi that is coming from the Orange openlrsng and has the capacitor to smooth out the signal. It's actual rxrssi not telemetry. The telemetry was 90's. I use rfd900 radios."
"Will will do that as soon as possible. I sent a plane log to tridge, randy, and you today but I had your email wrong. It was a plane log bc the throttle cuts in and out every half second once airborne. If you talk to tridge could you look at it. I'm…"
"That was my initial thought as well. But I did a range check prior and it was fine. Rxrssi never dropped below 75%. I really don't think that's the problem. I have not calibrated the esc. But don't have any synch issues on the bench. This only…"
PLANE: 3.4 problemsi have been trying to get plane going for a long time and keep having the same problem. i fly in manual mode so it isnt a problem with flight control. the throttle acts as though the signal is intermittent. half second on, half…
"Grant,
i was hoping i could ask you, randy, and anyone else who is in the know (that is not me) could please either make some fixes or change the wiki. specifically i talking about the tracker actually working. sometimes i power everything up and…"
"I see on August 1 that the official antenna tracker firmware changed to 7.3. I can't find anywhere what the change was. Would you please let us know what changed from .2 to .3"