Gender
Male
About
Location
Great Mills, MD
Please tell us a bit about your UAV interest
Interested in Stability and control as applied to soaring UAVs
Hometown:
Cave Creek, AZ
Activity Feed
"Is there any way to show signal strength similarly to how it is displayed on mission planner?"
AllI'm having a hard time getting APM Planner 2 to boot up. I've attached a screen shot of the error. Any help would be appreciated. Thanks!APMPlanner2.0Crash.png
"You should be able to have it switch to rtl but because the channel set to manual cannot be changed I believe you would have to reverse the polarity of the master switch to switch back to the opposite side of the spectrum. Also jule came up with a…"
"I am stuck in the same place you are here. Did you ever figure it out?"
"Any idea when the ublox case will become available for purchase? "
"I would caution using visual observations on the second flight. After a crash there are multiple problems you could be dealing with. A motor could have become misaligned (or just not the same alignment as the first flight), an ESC could have been…"
"Took me awhile to figure that also. Go down to channel 5 and hold menu until the menu pops up. Go down to switch and keep pressing left until you get to the "!" series of switches. They are after "OFF"."
"I'm using a frsky d8r-II plus."
"True about the confusion caused by too many modes. The set up allows me to get used to switch positions for 6 modes instead of having to change the three modes I can use in-between missions. The switch on the left is always available to override to…"
First I acknowledge lianpinkoh's post, "Channel Mixing in Turnigy 9XR for Arducopter/Arduplane" as this was the post I started out with. The method I explain below is only a Modified version of lianpinkoh's that is more taylored towards arduplane…
