Gender
Male
About
Location
Victoria
About Me:
Wanna be tech geek
Please tell us a bit about your UAV interest
Aerial mapping and not crashing
Hometown:
Melbourne
Activity Feed
"Yeah, I ordered one 3 weeks ago as a replacement just to see if it was my old one was faulty. I never heard back. When you click on your sales@littlesmartthings.com the header in the browser page says World Domination - ha ha!
If you want to do…"
If you want to do…"
Over the last 1.5 years I have been building a bit of a Frankenstein 550 Hexa. I have heavily modified a 550 (Pixhawk, AMP heavy lift motors, etc) to the point where the only aspect of 550 left is the distribution plate. Even that, I don't use the…
"Ordered! Shirt and hoodie!
Perfect for Aussie winter."
Perfect for Aussie winter."
"JoeBob,
This is fantastic advise and something I am going to follow. Making sense out of the flight modes on a 6 position was/is hard. However having GPS and Non-GPS as the 2 position makes this much easier to remember and practice.
cheers!
Mike"
This is fantastic advise and something I am going to follow. Making sense out of the flight modes on a 6 position was/is hard. However having GPS and Non-GPS as the 2 position makes this much easier to remember and practice.
cheers!
Mike"
"Be very careful with the 12v power rail. I had issues with 3s. Had to use a ubec to stabilise voltage. Pal soldering should not matter if you are on firmware above 2.0."
"I am on Windows 8.1 both x86 and x64, x64 doesn't even start, x86 throws a java timeout error in the logs"
"How do you get the application to connect via serial? I have tried to use FTDI drivers (current), older drivers (2.08) and cannot for the life of me get the application to connect to the SSv2 to calibrate the SS. It is really annoying!"
Hi All,I was just wondering if anyone out there had issues connecting the SSv2 via PC? I can't for the life of me get the application on Windows X64 to even fire up. The x86 does fine, but then it times out waiting for the com port to respond. I see…
Hi, I have a hexacopter that I am in the final stages of configuring the peripherals. I run a 4S parallel lipo and have a AMP heavy lift motors (770kv) and aimdrox arms and landing gear. With all of this and the gimbal, I need 5v for the servo rail…
"My setup will directly copy what I have with a tarot T2D into Alexmos for my Nex5 via Pixhawk. I have the T14SG and converted over to SBus but I run in a different mode (4 I think!?). I have 1-8 via Sbus and 9-14(16) via the Rx. I run retracts via…"
"Quick question, what is the torque like on the conversion from hover to plane? What servo grunt do you need and what is the transition time for an emergency (I quickly need to be in hover mode) take? Amazing, I want to get a firefly but they don't…"
