About Me:
just a pizza with sausage
About
Please tell us a bit about your UAV interest
UAV pizzas
Hometown:
Pizza Town
Activity Feed
i've got the whole micro apm set (http://www.hobbyking.com/hobbyking/s...3Mhz_APM_.html) the board comes with internal compass, and there is external one in the GPS. To disable the internal you cut a track on the board, which I did. I'm connecting…
That's what I get when I try to calibrate the compass. Actually that's why I bought whole new board, because I couldn't overcome this problem with the old one and thought it's faulty, since I did cut the jumper on it, to disable the internal compass…
"huh?"
"Ok this really is obscure topic :)"
This seems to be major issue when tuning a tricopter and updating the refresh rate seems to be wide spread advice.I'm with 3.2.1 and can't find the variable responsible for that like at all.I went through all the variables with YAW in the name and…
"none?"
I have a fresh build of quanum trifecta with micro apm.Initially the tail servo was moving left and right for no reason and causing the whole thing to shake violently as soon as it takes off the ground.After some experimenting I found that setting…
My first build with APM on a tricopter.As soon as I raise to 50%+ throttle and it stats to get off the ground the tail servo starts to move 15 degrees left and right which causes the whole thing to shake like it's having epileptic seizure.Spins very…
"lol you made me smile :)
First 3 times I was very gentle, every time I powered it it was still using the internal compass, so not cut
So 4th time I went John Cena on it and this is the result :)
yes i'm an idiot"
First 3 times I was very gentle, every time I powered it it was still using the internal compass, so not cut
So 4th time I went John Cena on it and this is the result :)
yes i'm an idiot"
"Ok images still don't show up. Seems like server side problem.
Here are the images for anyone curious enough :(
http://www.rcgroups.com/forums/showthread.php?t=2580304#post33703177"
Here are the images for anyone curious enough :(
http://www.rcgroups.com/forums/showthread.php?t=2580304#post33703177"
"Here are couple images where I did better job at the macro shotI've clearly cut some more tracks right?Is it fixable?I was 5 mins away from flying and this happen. I almost cried a little, lol20160112_160532.jpg20160112_161111.jpg"
"I think it's server side problem but let me try again.
In short, only red leds flash, blue and yellow doesn't appear20160112_143357.jpg20160112_143758.jpg"
In short, only red leds flash, blue and yellow doesn't appear20160112_143357.jpg20160112_143758.jpg"
Just after I cut the SJ10 thing to make it use outside compass it now is stuck and Initialising APM and leds flash only red. (it was led, yellow blue before) Reflashing worked, but didn't help. It seems to stop at downloading 33% of the paremeters…
"Anyone else knowing how to make the servo move the full 90 degrees?"
"The default values there were -45 and 45
I tried with -90 and 90, but that didn't change anything. Will have to try with 0 and 180
there is no gimbal controller, just a servo connected to pxhawk out 1"
I tried with -90 and 90, but that didn't change anything. Will have to try with 0 and 180
there is no gimbal controller, just a servo connected to pxhawk out 1"
"Yes they are set to 989 and 2014 respectively. That is what the radio calibration min and max shows.
Still only 90 degrees movement of the servo.
huh
edit:
RC9_TRIM is set to 1500
What does that mean?"
Still only 90 degrees movement of the servo.
huh
edit:
RC9_TRIM is set to 1500
What does that mean?"
