Gender
Male
About
Location
Devon
Please tell us a bit about your UAV interest
Want to join the APM club
Hometown:
PLYMOUTH UK
Activity Feed
"We have seen the exact same problem. Never did fix it .....................seems to come and go ???"
"I could not make mine work.
Can other members help ?"
Can other members help ?"
"Having spent a couple of frustrating weeks with the MinimumOSD I know the answer.......... It's a pile of crap!"
"Hi, Yes definitely but now it is best practice to buy a combined GPS and compass module (as recommended for APM 2.6)
http://www.ebay.co.uk/itm/3D-ROBOTICS-QUACOPTER-3DR-UBLOX-GPS-CHIP-..."
http://www.ebay.co.uk/itm/3D-ROBOTICS-QUACOPTER-3DR-UBLOX-GPS-CHIP-..."
Has anybody tried the new Drift mode in 3.1 whilst flying in fpv. I can find no video's of members experience with this combination. Plenty of Drift mode video's but none showing if the mode is really suited to fpv ?We have a quad 2.6 with FatShark…
"Well to answer my own question. Having now flown the mission within the attachment, Yep you definitely need to add multiple ROI statements. As soon as a new waypoint is hit after a ROI, the quad will yaw to the next waypoint heading.
No problem at…"
No problem at…"
We are based in Plymouth using a APM 2.6 Quadcopter, just about ready to try FPV
There are conflicting indications as to how to correctly use Mission Planner and ROI Please see my attachment. Using APM 2.6 with 3.1 firmware Is this the right way ?In particular should the ROI command only be issued one time ? ROI.PNG
"Hi, Could you please indicate which sonar sensor you are using, there seems to be a bewildering choice ?"
"I had a quick look at your logs but to me it looks like that you may not have had a brown out. The logs show altitude returning to zero ground level. With power fails the logs just stop eg for the altitude parameter ..in mid air (10m)
Why you…"
Why you…"
"Bet you that it is the telemetry unit, had the same problems
You need to make sue that the GPS and the telemetry modules are separated by as far as possible
Good Luck "
You need to make sue that the GPS and the telemetry modules are separated by as far as possible
Good Luck "
Hi,We have a 3DR APM 2.5.2 board upon which we have severed the required compass bridge on the APM board and have added a recommended external compassMy question is that the the board compass is still apparently been seen by the APM board is that…
"TOP TIP
Got V4 to load using Xloader but TOP TIP You need to give it a couple of minutes to start showing data. We thought it was not working but then after a few minutes ..................id did!"
Got V4 to load using Xloader but TOP TIP You need to give it a couple of minutes to start showing data. We thought it was not working but then after a few minutes ..................id did!"
"Thank you both ; LTMNO and Richard (DK)
To the Wider audience : Remember what seems obvious to you may not seem obvious to a beginner and you were a beginner once too!"
To the Wider audience : Remember what seems obvious to you may not seem obvious to a beginner and you were a beginner once too!"
"Yes thank you but do I use this to load the hex file
http://arducodes.googlecode.com/files/jD-IOBOard%20setup.exe
If not what do i use to actually use to load the HEX program ?
Many thanks in anticipation"
http://arducodes.googlecode.com/files/jD-IOBOard%20setup.exe
If not what do i use to actually use to load the HEX program ?
Many thanks in anticipation"
"Hi Jani
Great work, I've just installed FrSky telemetry to a LED v2 on a Turnigy 9XR with an APM 2.5.2 FC board using Arduino code
You work looks great but I don't understand what you are using with the hex files with ???
Could somebody please…"
Great work, I've just installed FrSky telemetry to a LED v2 on a Turnigy 9XR with an APM 2.5.2 FC board using Arduino code
You work looks great but I don't understand what you are using with the hex files with ???
Could somebody please…"
