Gender
Male
About
Location
Bkk
About Me:
--
Please tell us a bit about your UAV interest
Quad Rotor for Photograph
Hometown:
Bkk
Activity Feed
"I try optflow command in CLI it return "Sorry, not 1280 compat". What it mean?"
HiI just connect optical flow to APM and tune it on in hardware setup of Mission Planner and test in stabilize mode but I don't see any difference from before I got optical flow. Did I do some thing wrong? How do I config optical flow?Mission…
"For me this issue happen to me 3 time. but my mortor not burn. One of it just spine about 20% of full speed by it self. I notice my ESC firmware is not same. Then I think it must be some noise from ACM that old ESC's firmware can't filter out make…"
"My quad total weight is 3Kg (include batery but no camera). fly in X8 config. It same as X config but 4 mortor on top and 4 mortor buttom. My mortor size 2217 900KV with props 10*5 each can push out 0.7 Kg. so I have total lift power about 5.6 Kg.…"
"please see this page http://code.google.com/p/arducopter/wiki/ArduCopter?tm=6
"
"
