About

About Me:

Aeromodelista


Please tell us a bit about your UAV interest

Hexacopter


Hometown:

Córdoba


Activity Feed

luispez posted a discussion
Hi, today I have gone to fly my Hexacopter with APM 1 Ardupilot 1280 magnetometer GPS and 2.41 firmware. It flew very well during the first and second battery, even when to high winds and fast flight, but the end of the second battery the Hexa has…
Mar 7, 2012
luispez posted a discussion
Futaba FF9 set for six flight modes in Arducopter 2 or Mega Pirate.Associate the switch to channel 5 and 6 I have asociated to channel 5 the switch E and switch G to channel 6 Change End Point in channel 5 50/53Change Sub trim channel 5 and 6 to…
Aug 14, 2011
luispez posted a discussion
Hi, I`m going crazy.My Hexa didn´t work well and I recalibrated accelerometers, transmiter, etc, etc. I checked the motors and everything was well but the Hexa didn`t work well.I have a strange problem with the motor output number 8.If I connect…
Jun 4, 2011
luispez replied to Chuck's discussion Roll works, pitch doesn't
"You should calibrate CES. I had today this problem. I have calibrate CES and it works ok."
Jun 1, 2011
luispez replied to Kristian's discussion Stick center/drift problem
"To me it was the same with the code Ardu Pirates, I could not test well with Arducopter code because when I've flown windy but I felt that the problem persisted. It`s like to lose the center turns.
I think It could be a problem of PID settings.…"
May 31, 2011
luispez posted a discussion
Hi, I do not know how I can use the baro in Arducopter 2....Do I have to activate it in the arduino code?Thanks.
May 30, 2011
luispez posted discussions
May 29, 2011