Gender
Male
About
Location
Austin, TX
Please tell us a bit about your UAV interest
I am just a hobbyist
Hometown:
Austin
Activity Feed
Hello everyone,I have little to no expieexper in the drone field. However, a year ago I set to accomplish a very ambitious goal (meaning I failed it miserably). In summary, I wanted a drone that can detect RFID signals and react to those signals.…
"any help would be appreciated. "
"I just noticed the most Dumb thing: The GPS' ground was cut. But does that do any difference? And does that cause the APM to burn but not the GPS?"
I have two APM, APM0 and APM1 boards and two Power modules. Everything was going fine, I didn't fly my drone yet. Because before i fly it i noticed that whenever I connect the battery all motor spin, I am using a joystick, didn't calibrate it…
"For anyone who have this problem. Go to the Parameter List and change RC1_MIN to 1101 and RC1_MAX to 1901 and then repeat for RC2_, RC3_ and RC4_ then it should work."
"No if you connect to the APM by any way, then go to the Config/Tuning tab the Full Parameter List and scroll down till you find which parameter you want to change. You can also search by a search text box somewhere in the right column. After you…"
I opened the Webpage where it tells you how to operate APM with a joystick and followed it. I could setup controls. And can Calibrate. But when I go to the home screen it keeps repeating "PreArm: RC not calibrated."Tried to change settings to low…
"Hello, skip to quick answer if you want. I was trying to use my controller to control the APM. So I changed my 3DR radio setting to Low Latency Setting, then I tried to connect and I faced the same problem. Then I tried to revert the changes I made…"
"and I would need a Lipo battery right, so I am getting a 4S Lipo, so I wanted to check if the battery could be connected to the APM"
Just as the title say, I am going to connect an APM to a DJI f450 kit. I know that the APM can distrubute the power to the ESC's that are connected to it.I just want to make sure that if I connected the ESC's to the APM, I wont need to solder the…
"Which of the two do u think is better for me to use, I opened SITL setup window and understood how it works, and i already know what is mission planner, but still cant decide.
Thank you for all your help, you seriously helped me with everything."
Thank you for all your help, you seriously helped me with everything."
"I wanted to ask if i can make the APM work without a radio controller.
I want the APM to go into a grid search( I will make the search commands by myself), then when it receives the signal from the Arduino it loiters.
SO can the APM fly without a…"
I want the APM to go into a grid search( I will make the search commands by myself), then when it receives the signal from the Arduino it loiters.
SO can the APM fly without a…"
"I'm not using an rc controller, so I think my CH5 is open. But how would I connect it"
"What I Want to do is, when a condition in the Arduino is met, the Arduino will send signal to the app to change to loiter, or float, mode. Nothing more. And of course the APM is controlling the quad copter normally"
I want to connect a APM to an Arduino and send information from the Arduino to the APM. I just want to send 1 signal to the APM when a condition is met.If you could make it as simple as possible, i know enough programming.
"I just want to confirm my shopping list so i don't miss anything:
1)Arduino
2)M6e
3)Ardupilot
4)DJI f450
if i missed something please tell me"
1)Arduino
2)M6e
3)Ardupilot
4)DJI f450
if i missed something please tell me"
