About

Gender

Male


Location

jakarta timur


About Me:

I am a geologist


Please tell us a bit about your UAV interest

I am interested on using UAV to do autonomous aerial mapping. Initially using photogrammetry approach and want to move on utilising small LIDAR like the one sold by vellodyne


Hometown:

jakarta timur


Activity Feed

arga firmansyah replied to Aussie in AZ's discussion 1 battery vs 2 batteries that equal the same mah?
"This discussion really sheds a light to me.
Currently i'm rebuilding my quad from a serious crash.
I'm using a 6000 mah 6s lipo and now considering of using 2 x 6000 mah 3s lipo in series.
Would it be better in term of amperage draw on each…"
Oct 15, 2015
arga firmansyah commented on Trung Nguyen's blog post Phantom FX-61 Flying Wing 114 km Flight
"Thanks Trung nguyen, i have read on keeyen pang's blog in here 
http://diydrones.com/profiles/blogs/100km-challenge?id=705844%3ABlo...
I think utilising fx79 like him will be more appropriate to my goal, isn't it?"
Aug 29, 2015
arga firmansyah commented on keeyen pang's blog post 100KM Challenge
"Hi keeyen, very interesting result of your plane.
I'm about to built a plane targetting 90 minutes of flight time carrying a sony nex 5 with flatmap gimbal for mapping if possible. I want to attach a parachute for additional landing option on the…"
Aug 29, 2015
arga firmansyah commented on Trung Nguyen's blog post Phantom FX-61 Flying Wing 114 km Flight
"Trung Nguyen, you have a great achievement and very nice sharing.
I'm planning to build a long flight rig similar with yours but carrying sony nex 5 to do aerial survey. I'm planning to use a flatmap gimbal and a custom parachute for a landing…"
Aug 26, 2015
arga firmansyah replied to Pmarche's discussion Pixhawk and some ESCs with Low KV motors. Pixhawk is not the problem. Problem is related to ESCs, Firmware and fine tuning. in PIXHAWK
"Pmarche, i'm facing a similar problem on different motor.
I try to dig down on the net and heard a lot of good things on hobbywing x rotor series.
Read the discussion here http://www.rcgroups.com/forums/showthread.php?t=2254658  and see if that…"
Jul 23, 2015
arga firmansyah replied to Pmarche's discussion Pixhawk and some ESCs with Low KV motors. Pixhawk is not the problem. Problem is related to ESCs, Firmware and fine tuning. in PIXHAWK
"Just to make you aware, i'm using multistar 4225-390kv on 6s lipo with 13x6.5 prop along with ztw spider opto 30amp. I have had 2 crash due to esc failure. It was working perfectly great one day and then failed on the day after. "
Jul 23, 2015
arga firmansyah left a comment on PIXHAWK
"Hi gavarma, i face your problem 6 months ago.
finally i found that emax 4in1 esc is not compatible with pixhawk. It confirmed on emax website as well. I finally then replace the esc that previously working great with apm."
Jul 22, 2015
arga firmansyah replied to Richard's discussion Using Flying wings for aerial mapping
"Thanks for your feedback Wolfgang, would see that aeromao.
I'm a builder so starting from a scratch is preferable for me to cut cost.
2m of wingspan will be too big to transport i guess, 1 meter diameter of a quad could do the job as well but with a…"
Jul 22, 2015
arga firmansyah replied to Richard's discussion Using Flying wings for aerial mapping
"Hi guys, i'm glad found this discussion.
I manage to do an aerial photogrammetry survey using a multicopter with sony a5000 with a great result.
Somehow i found a limitation within my multicopter. I have try a couple of different multicopter and…"
Jul 21, 2015
arga firmansyah replied to Virgil's discussion PIWHAWK and AERO SKY QUADCOPTER in PIXHAWK
"That beep sound indicate a battery failsafe, if you are using a fully charge lipo, then you must be set the battery treshholed level too low. Your quad seems to be twitchy, i think you should tune your pid, an autotune is working great."
Jul 12, 2015
arga firmansyah replied to Randy's discussion Copter-3.3 beta testing
"Hi, 
currently i'm running a pixhawk on ac3.2 firmware.
I'm interested on using this ac 3.3, but it has been rolling from rc1 through rc6 and still on beta version.
Is it save for me using this ac 3.3 rc6 now? I'm not a newbie but nor an expert as…"
Jun 28, 2015
arga firmansyah replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem
"Somehow i'm not really that will help, but will try that this weekend.
I have try to use 3 different computer and came out the same result.
I have 2 hexa and both of them bahave the same as well."
May 21, 2015
arga firmansyah replied to Seppo's discussion RFD900, RFD900+ - New long range radio modem
"I have RFD900 both on the hexa and the ground control. TX power from the default setup is 20dbm. I have tried to change the tx power to 30 dbm with success but unfortunately it can't connect on mission planner if the tx power is 30 dbm. I have tried…"
May 21, 2015
arga firmansyah replied to Phil Gamito's discussion ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk
"Hi Phil, sorry to hear your problem. I'm facing similar problem 1 month ago. I end up using ZTW spider OPTO 30amp on multistar 390kv motor. Have been trying using 16in prop on 3s and 13in prop on 6s both without problem."
May 13, 2015
arga firmansyah commented on Thorsten's blog post Some tests on GPS, geotagging and stitching accuracy
"Hi SObido, i'm very interested on your work.
I was wondering how did you connect the second gps to the computer or tablet. I have my telemetry ready and a tablet with rtkgps+ app, but how do you connect the gps to the computer/tablet? can you post…"
May 6, 2015
arga firmansyah replied to Dave Williams's discussion Using AUX pins as relays for CHDK
"What is your esc type? Opto or the one that have bec?"
Apr 18, 2015
More…