Please tell us a bit about your UAV interest
Filming
About
Hometown:
Austria
Activity Feed
"Hi Nick,
another great piece of hardware again !
Just one question: Is this board fully Pixhawk compatible ?
I'll just ask because it seems the second microcontroller (STM32F100C8T6) is missing ..."
another great piece of hardware again !
Just one question: Is this board fully Pixhawk compatible ?
I'll just ask because it seems the second microcontroller (STM32F100C8T6) is missing ..."
"Maybe someone should add a note in the wiki the DO_CHANGE_SPEED command does not work as expected until now ..."
"Hi Randy,
I just saw RC4 is out, thanks for that.
Any chance following issue gets fixed in RC5 ?
https://github.com/diydrones/ardupilot/issues/1713"
I just saw RC4 is out, thanks for that.
Any chance following issue gets fixed in RC5 ?
https://github.com/diydrones/ardupilot/issues/1713"
"You may have a look here:
https://github.com/diydrones/ardupilot/issues/1587#issuecomment-696..."
https://github.com/diydrones/ardupilot/issues/1587#issuecomment-696..."
"I just want to report a small issue I found yesterday.My settings are: AHRS_GPS_MINSATS = 6, AHRS_EKF_USE = 1After my GPS had a valid 3D lock (and received 4 sats) I started in "Stabilize" and switched to "Position hold" shortly after.While still in…"
"@Randy,thanks for your reply.I just tried the battery alarm on my pixhawk using a adjustable power supply.The GCS is telling me "Battery low" but I'm not able to get any noise out of the buzzer even the power supply is down at 9V.Here's a short LOG…"
"Hi,thanks for the great work so far. I haven't found the right place for posting new feature requests, so I hope it's okay to post them here:1) Adjustable BatLow buzzer alarm Is quite handy and shouldn't be too difficult to implement ... Unless…"
"Hi all,just a quick feedback:I mounted the board on my quadrocopter, used mission planner to flash the latest arducopter firmware, did all calibrations and some mandatory settings and went for a few flights.The board (and firmware AC3.2-rc12) works…"
"What about automatically overwriting the oldest log (like a FIFO) ?"
"Hi Randy,
I know this is probably not the right place, but I don't know how else I can reach you ;-)
Can you PLEASE have a look at my forum post here about UART controlled ESC's:
http://diydrones.com/forum/topics/support-for-uart-controlled-esc-s…"
I know this is probably not the right place, but I don't know how else I can reach you ;-)
Can you PLEASE have a look at my forum post here about UART controlled ESC's:
http://diydrones.com/forum/topics/support-for-uart-controlled-esc-s…"
Hello,first of all I'm new here and want to apologize just in case I violate any forum rules.Not sure if this is the right place for following topic:I've an existing Kopter (Arm-o-Kopter) using uart controlled ESC's.I want to try a PixHawk on the…
