Gender
Male
About
Please tell us a bit about your UAV interest
UGV/UAV Engineer
Hometown:
PARIS
Activity Feed
"Hi,
Nice board, did you try to power a jetson nano ?
Matt"
Nice board, did you try to power a jetson nano ?
Matt"
"I am sure that Chris is already aware of farmers needs.
For those who doubt, this article will help them understand his approach :
https://www.expouav.com/news/latest/drones-will-become-boring-inter...
'Boring' yes that is the point, but It's not…"
For those who doubt, this article will help them understand his approach :
https://www.expouav.com/news/latest/drones-will-become-boring-inter...
'Boring' yes that is the point, but It's not…"
"It depends what kind of informations you want to get :
Those sensors can be used directly on Pixhawk through firmware settings https://docs.px4.io/en/getting_started/sensor_selection.html
https://pixhawk.org/peripherals/rangefinder
If you want to…"
Those sensors can be used directly on Pixhawk through firmware settings https://docs.px4.io/en/getting_started/sensor_selection.html
https://pixhawk.org/peripherals/rangefinder
If you want to…"
"The best combo and widely used is Pixhawk with Raspberry Pi as described here http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html
'I need to be a coder to work either' --> You will need at least to understand linux commands. And depending on…"
'I need to be a coder to work either' --> You will need at least to understand linux commands. And depending on…"
"You are right about Arduino : Both Arduino and Pixhawk/APM are based on microController
Although companion boards such as RPi are based on microProcessor
Christopher Harvey said:
See, I need to know these things I thought arduino was a…"
Although companion boards such as RPi are based on microProcessor
Christopher Harvey said:
See, I need to know these things I thought arduino was a…"
"Why you want to install Arduino in addition to Pixhawk ?
Caricaturing : Pixhawk is actually an Arduino, with low level capabilities for flight stabilization, but also supports high level commands through MAVLINK…"
Caricaturing : Pixhawk is actually an Arduino, with low level capabilities for flight stabilization, but also supports high level commands through MAVLINK…"
"Their are plenty of Tx/Rx video system available, it only depends on range (and cost) you are expecting but also on quality and reliability. Some inputs you have to take into account :
HD video = high quality, some delay in transmission VS Analogic…"
HD video = high quality, some delay in transmission VS Analogic…"
"If you want to compare several configurations you can use this site : https://www.ecalc.ch/xcoptercalc.php
It will give you some info about flight time regarding motor, battery, propeller...
3520 T-Motors and 5000mAh 6s battery with 13'' propellers…"
It will give you some info about flight time regarding motor, battery, propeller...
3520 T-Motors and 5000mAh 6s battery with 13'' propellers…"
Hello,I am building a light weight foldable quad (550 size) with some options : telemetry, MavLink_FrSkySPort, 3 axis gimbal for the lightweight Runcam Split; based on a 3DR Pixhawk Mini.Thus I am wondering if it is possible to acces Serial2 port…
"Probably one of the best 'ready to go' FCU/ROS platform available.
Nice job "
Nice job "
