Gender
Male
About
Please tell us a bit about your UAV interest
Building my own
Hometown:
london, ontario
Activity Feed
"I am aware of that check box but it isn't there. Because of this I also can't save my perameters to file."
Anyone know why I can't see full parameters list anymore. I can't seem to find the advanced view checkbox in the planner page? I would prefer advanced view as the default.
"You can achieve this by activating the fence option in initial setup tab under mandatory hardware settings. You can set altitude and distance as well as what it will do when it reaches that value. "
Having just got back from emergency, I thought i would mention how important it is to remove the props when doing any esc calibrations, testing or what have you when in closed quarters. I've been working with drones for about 3 years and until…
"Adruino IDE open now what? Not use before. I try with avrdudes and not work. I have stk500v2mega2560.hex and
Stk500boot.c files, which one and how to flash with arduino ide? Almost there..."
Stk500boot.c files, which one and how to flash with arduino ide? Almost there..."
"In. VCC-MOSI-GRND Out
. O O. O
. O. O. O
. MISO-SCK-RST
Are all pins used?"
. O O. O
. O. O. O
. MISO-SCK-RST
Are all pins used?"
"What .hex file and please attach link to file, I am ready to flash but I don't know what hex to use."
"Wow, I've been waiting for over 5 months to a solution to this problem. If it works for me I will be greatly appreciative. Can u post a diagram or mapping for what pin goes where? It is hard to see in the photos...much thanks!"
I have the new apm pro mini from china. Had it working great until it stopped connecting. All I have is a solid green power and no action lights. Assuming ive bricked it, I've been everywhere on the net to see how to flash the bootloader etc. But…
I bought an apm2.6 from china and worked fine for a while but now when I try to update the firmware it cant connect it is apm mini pro side pins. All I get when I plug in is solid green led.it flicks blue occasionally during update try but nothing…
"You need to change the stick mode on your transmitter to mode 4. Go into full param list in cofig an click MOT and change arming speed to 0. It is the first param under MOT setting. It should be default 70. Hope that helps."
Hi all, in the middle of building my first quad and would like to use ppm from my receiver to my apm 2.6 pro mini. The controler is the small unit with side posts, 24 pins on each side and no white connectors for I2c or telem etc.. I havent found…
